1. DL manuals
  2. Ganz
  3. Network Hardware
  4. NR4HL
  5. User Manual

Ganz NR4HL User Manual

Other manuals for NR4HL: User Manual
Manual is about: HD1080p

Summary of NR4HL

  • Page 1

    １ a.

  • Page 2

    ２ content overview playback 3 before installation 75-77 if you want to play 4 key features 6 front panel 7-8 rear panel 9-10 remote control at a glance installation archiving 11-14 hdd replacement 15 basic layout 78-80 to start the archive menu 16-25 connecting to an external devices 26 camera insta...

  • Page 3

    ３ overview the company shall not have any responsibility for any accident or damage that may incur during the use of the product. For your safety, we provide a few instructions about installation, manipulation, cleaning, assembly/disassembly of the product as below. So please read carefully and comp...

  • Page 4

    ４ overview key features this product allows you to receive audio and video signals from a max of 4/8/16 ch 1080p h.264 network camera before saving them to the internal hdd. Besides, you can also transfer them to an external device that can be monitored on your pc or mobile phone remotely.  display...

  • Page 5

    ５ overview what's included mouse remote control x1 power cable x2 & batteries (aaa x2) (provide only 1 for nr8h) dc 12v adaptor dc 48v adaptor screws (nr4hl/nr8hl only) (except nr8h) adapter cable retainer clip x2 user manual cd quick user guide (nr4hl/nr8hl only) terminal blocks x2 8-channel extens...

  • Page 7

    ７ overview rear panel no name description 1 cam1~cam8 ethernet ports used for connecting the network camera video and power. 2 wan(uplink) network port for connection to the internet, router or hub 3 audio in microphone connection port. 4 alarm out alarm output device connection port. 5 rs-485 commu...

  • Page 8

    ８ overview rear panel

  • Page 9

    ９ overview remote control at a glance logout logout power turn on or off the power. Panic start the emergency recording. Search display the search window. Alarm show the alarm status with a popup window. Archive display the backup window. Setup display the system setup menu. Channel function as chan...

  • Page 10

    １０ overview change the remote control id the remote control will be active only if the remote control id matches with that specified on the nvr. If multiple nvrs are installed on one place and you have just a single remote control, use the id button to set the remote control id. Only the id-matching...

  • Page 11

    １１ installation nr4hl/8hl 1. Remove the bracket screw on the bottom of the nvr. 2. Hold the bracket handle in the middle and pull it out to separate the bracket form the main unit. 3. Install the hdd on the separater bracket and fasten 4 screws on both sides to secure hdd.  when installing hdd, mak...

  • Page 12

    １２ installation 4. Insert the bracket instead with hdd back into the main unit. 5. Fasten the bracket screw removed earlier..

  • Page 13

    １３ installation nr8h/16h 1. Remove 2 screws on both ends of nvr. 2. Pull the front side of the unit forward to separate it. 3. Hold the middle of the hdd brackets handle with index finger and pull it toward while sustaining the bracket handle with your thumb and middle finger as shown in the illustr...

  • Page 14

    １４ installation 4. Once the hdd bracket is separated from the main unit, remove 4 screws on both ends of hdd bracket to separate the hdd. 5. Install a new hdd and fasten 4 screws back to both ends of the bracket to fix.  when installing hdd, make sure to install in the correct direction. 6. Push th...

  • Page 15: Basic  Layout

    １５ installation basic layout precautions to secure recording stability from an overloaded network traffic , hacking attempt or dos (denial of service) attack, only the direct cable connection between camera and nvr is allowed.  using a hub is allowed only for extending single channel for extended t...

  • Page 16

    １６ installation connecting to an external device connecting to the monitor this product supports vga (d-sub) monitors that support resolution of 1080p 60hz hdmi or 1920x1080. Connct the product with hdmi cable by connecting it to hdmi out port under the unit and h dmi input port of the monitor. Or, ...

  • Page 17

    １７ installation - nr8h /nr16h apply power to nvr main unit, and connect the provided dc 48v power supply adaptor to the external poe switch (power over ethernet for 16-channel models). Nvr power connection connect the provided power cord to the power inlet. Poe switching hub power connection plug th...

  • Page 18

    １８ installation connecting the camera you can connect a poe-featuring ip camera to the rear [cam1]~[cam8], rj45 port using the cat5 10/100mb ethernet cable without a separate power source. Connect ip cameras to the [cam9] ~ [cam16] ports of the hub, and connect [lan (downlink)] port and the hub’s [n...

  • Page 19

    １９ installation precautions to secure recording stability from an overloaded network traffic, hacking attempt or dos (denial of service) attack, only the direct cable connection between camera and nvr is allowed.  if the ip camera provides the alarm i/o port or audio i/o port, you can make alarm or...

  • Page 20

    ２０ installation if the distance between the nvr and ip camera is more than 100m you may extend the transfer range by connecting a switching hub or poe device between the ethernet port and ip camera if desired distance is longer than 100m.  connecting cameras directly to a general switching hub requ...

  • Page 21

    ２１ installation alarm i/o connection to connect the alarm input signal 1. While pressing and holding the [a1] or [a2] port button in the rear bottom of the nvr, insert the alarm signal cable in the hole under the button. 2. Insert the grounding wire in the [gnd] port. 3. To ensure secure connection,...

  • Page 22

    ２２ installation communication port rs-485 connection connect the keyboard controller. You can connect a text-in device such as pos or atm. After connecting the control device, be sure to match the connection settings between nvr and device. Make communication settings in . (page 55) 1. Use the signa...

  • Page 23

    ２３ installation esata storage if the internal storage space is insufficient, you can extend your storage capacity by adding an esata storage device to the rear esata port. Recommended esata device -manufacturer : sarotech -model : c5-us3-n  using devices other than recommended esata products may ca...

  • Page 24

    ２４ installation network connection pc connection in the local network you can connect nvr to a pc in the same network and control or manipulate it on the pc monitor. 1. Connect the [wan(uplink)] port in the rear panel to the router or hub. 2. Connect the local pc to the router or hub. 3. Enter the a...

  • Page 25

    ２５ installation pc connection from a remote network you can connect nvr to a pc or mobile device in the same remote network and control or manipulate it on the monitor of the pc or mobile device 1. Connect the [wan(uplink)] port in the rear panel to the router. 2. Connect the [wan(uplink)] port of t...

  • Page 26

    ２６ installation camera installation mode you can set all connected cameras into installation mode for analog video output monitoring. Click network status icon on the live view screen to open network status window. Press , , and in order by remote control to open “camera installation mode ” menu cli...

  • Page 27: Start  Up/  Shutdown

    ２７ monitoring start up/ shutdown start you can connect nvr to a pc in the same network and control or manipulate it on the pc monitor. 1. Connect the adaptor to the 48v poe power input port in the rear panel of nvr.(nr4hl/8hl) or connect to external hub(nr16h)  make connection when the power is not...

  • Page 28

    ２８ monitoring system shutdown you can connect nvr to a pc or mobile device in the same remote network and control or manipulate it on the monitor of the pc or mobile device 1. In the monitoring screen, click in the bottom left corner of the screen to the system, or press the [power] button on the re...

  • Page 29

    ２９ monitoring live screen at a glance the live screen largely consists of three components: video window, status bar and timeline z one. Video window icons used in the video window. Item description camera id show the camera id record mode icons displayed if an event recording is reserved. Display t...

  • Page 30

    ３０ monitoring status bar press the ▼ button on the remote control, or place the mouse in the lower area of the screen to display the status bar. Item description menu button select one of the system setup, search and backup menu it ems before accessing it. User id show the id of the user who has cur...

  • Page 31

    ３１ monitoring timeline press the [ ▶] button on the remote control or move the cursor to the right of the screen to display the timeline. Double-click the timeline to move to the video screen. Drag and drop it to make backup or event search for the specified area. Item description timeline date disp...

  • Page 32

    ３２ monitoring using the status bar in the live mode selecting a split mode click a desired split mode from 1, 4, 9, 16, 6 and 8 split screen. Or press the [display] button on the remote control until a desired split mode is displayed.  4ch (8ch) nvr model support only 1- and 4-split (8-split) scree...

  • Page 33

    ３３ monitoring pan/tilt control use mouse to rotate the ptz camera in the direction of up/down/left/right and diagonal directions. You can control pan/tilt with [▲▼◄►] buttons of the remote control. Zoom / focus control you can control the ptz camera for zooming and focus adjustment. Click button to ...

  • Page 34

    ３４ monitoring 2. C ontrol the camera’s ptz while watching the video. Press the button to append t he preset. >click the shortcut icon to move to the corresponding ptz (preset) position. >click delete icon to delete the corresponding preset. Preset: memorizes the ptz camera’s framing for direct acces...

  • Page 35

    ３５ monitoring digital zooming you can enlarge the monitoring screen for better view. Zooming will enlarge the video of the selected channel. If no channel is selected, channel 1 will be zoomed. 1. Click zoom in the status bar or move the cursor to a desired channel and right-click it to display the ...

  • Page 36

    ３６ monitoring to select an audio output channel you can select a camera outputting the voice signal from the microphone that is connected to nvr. To check the alarm status you can check the alarm status of each camera. Click to close the window to check the network status you can check the network c...

  • Page 37

    ３７ monitoring saving captured snapshots you can capture the current video screen and save or export to a connected storage device. 1. Select a channel first, and right click to open popup menu, and select menu item, or press the [snapshot] button of the remote control. 2. Connect a storage device, a...

  • Page 38

    ３８ system setting to move to the system setup menu how to use the mouse how to use the remote control 1 how to use the remote control 2 ..

  • Page 39

    ３９ system setting camera setting you can configure the camera settings on the nvr screen regarding the camera title, image, hide/show, and motion. Camera title you can change the camera title that is displayed on the screen. 1. From - , select . 2. Use the [▲▼◀▶/enter] buttons on the remote control ...

  • Page 40

    ４０ system setting 3. To apply the change, click in the bottom of the screen. 4. When done, press the [exit] button on the remote controller or in the lower screen. Covert setup you can set to hide the camera video so that a specific user or user group can not view. Set a channel(s) that you want to ...

  • Page 41

    ４１ system setting 3. To apply the change, click in the bottom of the screen. 4. When done, press the [exit] button on the remote control or click in the low er screen. The confirmation message appears and you will return to the previous menu.  the above options such as and and how to set the motion...

  • Page 42

    ４２ system setting ptz setup you can set the camera id, protocol, baud rate and data transmission speed for each channel. 1. From - , select . 2. Use [ / enter] buttons of the remote control or mouse to set the address (id), protocol and data transmission speed for each channel. 3. To apply the chang...

  • Page 43

    ４３ system setting > border line: specify the display of the cross-border between channels in a split mode > border color : select a color for the border. > user name : specify the display of the currently logged-in users on the status bar. > language : select a menu display language. 3. To apply the...

  • Page 44

    ４４ system setting 6. If the selected split mode is confirmation displayed on , select a channel you want to display in each split screen. 7. Click . The set sequence mode is confirmed and will be added to the add sequence list in order 8. When done, click in the bottom of the screen. After the seque...

  • Page 45

    ４５ system setting audio setup you can configure the settings of the voice and audio signal. Audio choose whether to receive the live sound source and select an audio channel. 1. From - , select . 2. Use the [▲▼◀▶/enter] buttons on the remote control or use the mouse to select an item that you want t...

  • Page 46

    ４６ system setting user setting you can configure the settings regarding user management and user and group permissions. Management you can add a user account(s) that can be edited at a later time. 1. From - , select . 2. Use the [▲▼◀▶/enter] buttons on the remote control or use the mouse to add a us...

  • Page 47

    ４７ system setting to edit the user account information 1. From the list of users, select a user account to edit and click next to it. 2. From the edit window, make necessary changes and click . 3. To delete the user account, click . The account cannot be changed or edited. . Group authority you can ...

  • Page 48

    ４８ system setting network setup you can configure the settings regarding user management and user and group permissions. Ip setup specify the ip address as well as the remote service port. 1. From - , select . 2. Use the [▲▼◀▶/enter] buttons on the remote control or use the mouse to specify each ite...

  • Page 49

    ４９ system setting ddns you can configure the ddns settings so that remote users who are connected to the network can access remotely ddns is an ip redirection service in a dynamic ip environment that redirects (maps) the new ip address to a registered domain name each time the ip address is changed....

  • Page 50

    ５０ system setting 3. To apply the change, click in the bottom of the screen. 4. When done, press the [exit] button on the remote control or click in the lower screen. The confirmation message appears and you will return to the previous menu. Network status from the network map screen, you can check ...

  • Page 51

    ５１ system setting detail status you can check the details of the cameras that are connected to each channel. Click in the right area of the list to show the details. Click in the “ip camera configuration ” window to reset the ip camera. When the ip camera settings are complete, click . Security for ...

  • Page 52

    ５２ system setting system you can configure the settings of date/time, system management, and keyboard controller. Date/time specify the current date and time. 1. From - , select . 2. Use the [▲▼◀▶/enter] buttons on the remote control or use the mouse to change the time or set the options as necessar...

  • Page 53

    ５３ system setting system management you can check, update or reset the system information. 1. From - , select . 2. Use the [▲▼◀▶/enter] buttons on the remote control or use the mouse to set each option of the system management. Fw update : you can update the current software with the latest version....

  • Page 54

    ５４ system setting to perform the upgrade 1. Connect the usb storage device that contains the updatable files. 2. Click . 3. Select one(s) from the updatable files list listed in . 4. Click . 5. When the confirmation message appears, click . 6. The progress bar displays the progress of the firmware u...

  • Page 55

    ５５ system setting control device configure the settings of the remote control and keyboard controller. 1. From - , select . 2. Use the [▲▼◀▶/enter] buttons on the remote control or use the mouse to set the connection options for the control device. >system id : set the id of the nvr so that the keyb...

  • Page 56

    ５６ system setting storage you can configure the settings of and view information of the disk and external storage device. Disk information it will show information about the connected disk. 1. From - >, select . 2. Use the [▲▼◀▶/enter] buttons on the remote control or use the mouse to select either ...

  • Page 57

    ５７ system setting disk operations you can set to delete the recording automatically and set the overwrite options, and you can also format the hdd recording data. 1. From - , select . 2. Use the [▲▼◀▶/enter] buttons on the remote control or use the mouse to set the operation conditions of the disk. ...

  • Page 58

    ５８ system setting click to view the details of the remote control and keyboard controller. - normal : the disk is in a normal state. - check : the disk has an error so that you need to check the disk or the connection cables of the disk. If you leave the problem unresolved, no recording may be enabl...

  • Page 59

    ５９ system setting on/off schedule you can activate or turn off the alarm output as scheduled. 1. Use the [▲▼◀▶/enter] buttons on the remote control or use the mouse to select a for the schedule. 2. Drag the mouse to resize the cell or use the on the [▲▼◀▶] buttons to move to the cell, then press [en...

  • Page 60

    ６０ system setting buzzer output you can notify the user of the event using the buzzer. >duration - transparent : keep the buzzer out for as much time as the event lasts. - until key : keep the buzzer out until a mouse or remote control button is pressed. - 5 ~ 300 sec : keep the buzzer out for as lo...

  • Page 61

    ６１ system setting email if an event occurs, this will notify registered users of the event by email. If you do not want to receive the email, uncheck the option in . (page 49) >add new email: if you want to add a new mail recipient beside the existing ones, click this to add the recipient. >minimum ...

  • Page 62

    ６２ system setting motion sensor you can set an action to execute when a motion is detected. For the settings of the motion sensor, move to . 1. From - , select . 2. Use the [▲▼◀▶] buttons on the remote control or use the mouse to specify the ignorance interval and operation. >ignoring interval : spe...

  • Page 63

    ６３ system setting system event you can set any action to an event related to the disk, recording, network or system. Like the other events, you may notify the event to the user using the alarm/buzzer output, osd pop-up or email. 1. From - , select . 2. Use the [▲▼◀▶] buttons on the remote control or...

  • Page 64

    ６４ system setting system >booting event: this event occurs when the nvr is booting. >login fail event: this event occurs when the nvr fails to log in. You can specify the times of clicking to trigger the event. >fan error event : this event occurs if the cpu cooling fan or unit's cooling fan does no...

  • Page 65

    ６５ record setting you can configure the record settings for the nvr. Only authorized users can access the record setup menu. To start the record setup menu how to use the mouse how to use the remote control 1.

  • Page 66

    ６６ record setting record setup you can set the recording options for auto or manual mode. 1. From menu, select . 2. Use the [▲▼◀▶] buttons or use the mouse to set to or. 3. Set the recording options for each selected record mode. 4. To apply the change, click in the bottom of the screen. 5. When don...

  • Page 67

    ６７ record setting continuous recording you can configure the settings of: continuous recording time, recording size, frame rate per second and quality. 1. From the menu, select . From , you must set to before you can set the . 2. Use the [▲▼◀▶] buttons on the remote control or use the mouse to selec...

  • Page 68

    ６８ record setting schedule setting 1. Select a start day of the week on the schedule. 2. Click a time cell from which you want to make the schedule and drag it to a desired cell. Or use the [▲▼◀▶] buttons on the remote control to move to the cell and press [enter]. Then, use the [▲▼◀▶] buttons to mo...

  • Page 69

    ６９ record setting alarm recording specify the recording size of the alarm event if it occurs and make schedule for that recording. 1. From the menu, select . 2. Use the [▲▼◀▶] buttons on the remote control or use the mouse to select either or . 3. Set each item of , , and use of the for the alarm re...

  • Page 70

    ７０ record setting network streaming you can specify the maximum size of network streaming for remote users and set the fps. Even if you set the resolution and fps to high for the network streaming, the nvr will redu ce the size or fps according to the network status (speed) before transferring the r...

  • Page 71

    ７１ search you can configure the record settings for the nvr. Only authorized users can access the record setup menu. To move to the search menu while in monitoring how to use the mouse how to use the remote control 1 how to use the remote control 2 to move to the search menu while in playback mode h...

  • Page 72

    ７２ search time search with the calendar, you can search for the recording data by the recorded date. 1. From the menu, select . 2. Use the [▲▼◀▶] buttons or use the mouse to specify the search date and time from the calendar in the lef corner of the screen. >first : the first date of recording is au...

  • Page 73

    ７３ search thumbnail search to improve your search, you will be provided with a list of thumbnails. Select day, hour or minute to narrow down the search results. 1. From the menu, select . 2. Use the [▲▼◀▶] buttons or use the mouse to specify the search date and time from the calendar in the left cor...

  • Page 74

    ７４ search event search search for events that occurred at the specified time and select an event to play from the list. 1. From the menu, select . 2. Use the [▲▼◀▶] buttons or use the mouse to specify the and times in the left of the event search list. 3. Select a channel to search. 4. Mark the chec...

  • Page 75

    ７５ playback if you want to play 1. To play the searched data - you can search for and play a searched data. 2. To play with the live viewer - simply double-click a desired time point in the right corner of the play screen.  if you move the cursor to the rightmost, the "timeline" bar will be display...

  • Page 76

    ７６ playback event search search for events that occurred at the specified time and select an event to play from the list. Playback channel selection menu item description cam1 display the title of the selected channel. Zoom zoom the video of the selected channel. (the zooming function is active only...

  • Page 77

    ７７ playback bookmarking during playback, you can add a bookmark for reserving the video data. You can view the bookmarked data in the archive menu, which can be saved to a connected device for the backup purpose. 1. Provide a tag in the item for data reservation. 2. Provide the details of the reserv...

  • Page 78

    ７８ archiving to start the archive menu using the archive menu during playback 1. During the playback, click . 2. The "archiving setup" window appears where you can reserve the data. 3. Click > in the lower left corner and select the menu. 4. Press the [archive] button on the remote control. Using th...

  • Page 79

    ７９ archiving reserved data management you can search for the reserved data and delete or import it to a storage device. 1. From the meun, select . The reserved data will be listed. 2. Select a data type from and . > avi : searches avi video fi les stored in the nvr. > snapshot capture : searches cap...

  • Page 80

    ８０ archiving archive devices setup provide the ftp server information for archiving data in the hdd before testing the transfer. 1. From the menu, select 2. Move to the ftp information box. 3. Fill in each item using a virtual keyboard.  host name : enter the address at which you can access the ser...

  • Page 81

    ８１ web viewer what is the web viewer? Web ra is a user-friendly software application that enables you to control the video data in c onnection with a remote nvr. System requirements operating system windows xp professional windows vista home baisc / premium, window 7 web browsers: internet explorer ...

  • Page 82

    ８２ web viewer 1. Provide the user id and password.  the default user name : admin; the default password is 1234. 2. Click the upper warning bar to install the activex.  if you fail to download the activex control, move to tools  internet optionssecurity custom level download unsigned activex c...

  • Page 83

    ８３ web viewer live live screen at a glance item description 1.View selection tab you can switch to the live, playback and setup screen and check the provided information. 2. Live display the live screen of the currently connected nvr. 3. Split mode select and switch to a desired split-screen mode. 4...

  • Page 84

    ８４ web viewer switching the split mode click the switch button to switch the mode as follows:.

  • Page 85

    ８５ web viewer to save the video 1. Click to start saving. 2. The video from the selected channel will be saved to the pc in the avi format. (default path: c:¥savefolder) click again to stop saving. Click to display the context menu where you can change the saving path. Print 1. Click to start saving...

  • Page 86

    ８６ web viewer status tab click at the bottom of the screen. You can check the event occurrence for each channel of the connected nvr. Log tab click at the bottom of the screen. You can check the log of the connected nvr.. Ptz tab click at the bottom of the screen. You can control the operations of a...

  • Page 87

    ８７ web viewer search click to display the remote control screen for the nvr. Search viewer at a glance item description 1.View selection tab you can switch to the live, playback and setup screen an d check the provided information. 2.Playback screen play the recording data. 3.Split mode select and s...

  • Page 88

    ８８ web viewer search by time use the timeline to search for the data recorded in the nvr. 1. Select a date that you want to search. 2. Click . 3. Check the existence of recording data in the bottom time line and specify the time range for your search. You can specify the start time by moving the tim...

  • Page 89

    ８９ web viewer setup click to display the remote control screen for the nvr. When done, click to apply the changes to the remotely connected nvr.  if the nvr is in process of system or record setting, the remote control will be  disabled. If you change the settings remotely at will, the major 'reco...

  • Page 90

    ９０ web viewer motion setting specify the use of motion detection and reaction for each channel and set also the daytime/nighttime options. Select a channel. Set the mask area and activation and specify the daytime range. When done, click to apply the changes.  for information about how to set the m...

  • Page 91

    ９１ web viewer audio audio/buzzer you can configure the settings of the voice and audio signal.  for details about each displayed item, refer to "audio setup".(page 45) user user management you can add a user account and change the password.  for details about each displayed item, refer to “user se...

  • Page 92

    ９２ web viewer network network setting you can check the network connection status and change the baud rate. Change the maximum transfer rate and click to apply it.  for more information about each network entry, refer to "ip setup". (page 48) ddns setting you can configure the ddns settings so that...

  • Page 93

    ９３ web viewer system date/time setting specify the current date and time. When done, click to apply the changes.  for for more information about each of the time and date settings, refer to "date/time". (page 52) system management you can configure the access settings of: log in, log out, and auto ...

  • Page 94

    ９４ web viewer system information you can check information of system firmware version, disk space, and network settings, as well as the status information of network connection and alarm i/o. Control device setting set the connection of both the remote control and the keyboard control. Change the co...

  • Page 95

    ９５ web viewer event alarm output specify the alarm output conditions with the work schedule.. When done, click to apply the changes..  for more information about the alarm output and on/off schedule, refer to "alarm out". (page 58) event notification specify the notification method using one of ,, ...

  • Page 96

    ９６ web viewer alarm sensor you can configure the settings of the alarm sensor and specify the operation of the sensor if an event occurs. When done, click to apply the changes.  for more information about each of the alarm sensor actions, refer to "alarm sensor". (page 61) motion sensor you can set...

  • Page 97

    ９７ web viewer system event you can set which action to perform if an event related to the disk, recording, network or system happens. You may want to notify the user of the event using the alarm output, buzzer, osd popup and email. When done, click to apply the changes.  for more information about ...

  • Page 98

    ９８ web viewer record setup record setting you can set the recording options for auto or manual mode when done, click to apply the changes.  for more information about how to set each mode, refer to "operation mode". (page 66) continuous recording you can configure the settings of: continuous record...

  • Page 99

    ９９ web viewer motion recording set the and the to apply if a motion event occurs. Click > next to each item to display the list of values available. Complete setting the for the motion recording as well as the , and click to apply the changes.  for more information about the motion recording size a...

  • Page 100: About

    １００ web viewer panic recording from the menu, you can set the resolution, fps, quality and audio settings to your preference. Click > next to each item to display the list of values available. When you have completed the manual record settings, click to apply the changes.  for more information abou...

  • Page 101: Ganzview

    １０１ mobile viewer ganzview you can use the smart viewer to monitor the network on a remote site and play the monitori ng video anytime anywhere. Ganzview specification minimum/ recommended specification os minimum specification recommended specification android phone processor :800 mhz or higher fla...

  • Page 102

    １０２ mobile viewer using the ganzviewer on iphone how to download the iphone-dedicated application from your iphone, access the app store. Enter "ganzview" in the search bar to find it befor e downloading. Install the application on your iphone. The ganzview supports the 1/4 split scre en mode.  wit...

  • Page 103

    １０３ mobile viewer 5. Provide the access id of the dvr as well as the password. 6. Specify the use of the auto login. 7. Click . 8. Select the site that you added in the dvr list. 9. Try to access the nvr. If connected successfully, you will see the screen as shown..

  • Page 104

    １０４ mobile viewer split mode 1. Click any area on the screen. The main menu appears at the bottom of the screen. 2. Click in the top left corner to switch to 1-split mode; click to switch to 4-split mode.  use the mouse to scroll the screen to the left or right to move to the next camera video scre...

  • Page 105

    １０５ mobile viewer using the log view 1. From the main menu, click . You can check the log of the data stored. 2. Select one from alarm, motion, record, etc. And click . You will view the log of related items..

  • Page 106

    １０６ mobile viewer using the search function 1. From the main menu, click . You can view the history of the data stored. 2. Select a desired time and date. You can use the vertical time bar to specify the start time. 3. Click to play the video recorded at the specified time. 4. Click any area to disp...

  • Page 107

    １０７ mobile viewer using the setup function from the main menu, click . You will be connected to the web viewer site.  for details about each displayed item, refer to "setup".(page 89).

  • Page 108

    １０８ mobile viewer using ganzview with android how to download the android-dedicated application from your smart phone, access the market. Enter "ganzview" in the search bar to find it before downloading. Install the application on your smart phone.  the ganzview supports the 1/4 split screen mode. ...

  • Page 109

    １０９ mobile viewer 8. Select the site that you added in the nvr list. Press and hold the mouse button to display the pop-up window. 9. Select connect> and try to access. If connected successfully, you will see the screen as shown. Split mode 1. Click any area on the screen. The main menu appears at t...

  • Page 110

    １１０ mobile viewer 2. Click in the top left corner to switch to 1-split mode; click to switch to 4-split mode.  use the mouse to scroll the screen to the left or right to move to the next camera video screen. Using the log view 1. From the main menu, click . You can check the log of the data stored....

  • Page 111

    １１１ mobile viewer using the search function 1. From the main menu, click . You can view the video of the recording data. 2. Select a desired time and date. You can use the vertical time bar to specify the start time. 3. Click to play the video recorded at the specified time. 4. Click any area to dis...

  • Page 112

    １１２ archive viewer you can play the data archived in the nvr or the hdd data recorded by the nvr. Getting started with the backup player 1. Connect the nvr to the backup usb storage device. 2. Open the folder saving the archived images. 3. Run the backup player. 4. Click in the bottom left corner to...

  • Page 113

    １１３ archive viewer backup player at a glance item description 1.Setup minimize, close configure the environment settings. Minimize or close the backup player. 2.Channel information show the channel information and the video resolution. 3.Play time display the time of the current video image 4.Play t...

  • Page 114

    １１４ archive viewer video capture click > to capture the current video image.  selected video : capture the actual frame of the current video.  screen : capture the visible portion of the current video.  format : select a saving format. (bmp, jpg, png)  path : specify the saving path. Default loc...

  • Page 115

    １１５ archive viewer settings click to configure the backup player settings. You can check the version of the backup player.  maintain image aspect ratio : preserve the aspect ratio of the image. If you do not mark this option, the image will be adjusted to fit the screen.  about : you can check the...

  • Page 116

    １１６ appendix specification (nr4hl / nr8hl) item details 8 ch 4 ch remarks video input video # of channels main monitor main monitor resolution motion detection 8 x ip camera (max hd108 0p) 8 ch full hd display hd1080p/60hz yes (from ip camera) 4 x ip camera (max hd108 0p) 4 ch full hd display hd1080...

  • Page 117

    １１７ appendix specification (nr8h / nr16h) item details 8 ch 16 ch remarks video input video # of channels main monitor mainmonitor resolution motion detection 8 x ip camera (max hd108 0p) 8 ch full hd display hd1080p yes (from ip camera) 16xip camera (max hd1080 p) 16 ch full hd display hd1080p yes ...

  • Page 118

    １１８.

  • Page 119

    １１９.

  • Page 120

    １２０.