Ganz PixeIPro Series ZN-C1M Quick User Manual

Quick User Guide 

ZN-C Series Network Camera

                                                                                   Ver1.20  EN

1

Warning before installation

  -Power off the Network camera if it is found to be smoking or smells unusual. 

-Keep the Network camera away from water.    If the Network camera gets wet, power 

off immediately. 

-Do not place the Network camera near heat sources, such as a television or oven. 

  -Refer to your instruction manual for the operating temperature. 

-Keep the Network camera away from direct sunlight. 

-Do not place the Network camera in high humidity environments. 

-Do not place the Network camera on unsteady surfaces. 

-Do not touch the Network camera when there is lightning present. 

-Do not disassemble the Network camera. 

-Do not drop the Network camera. 

-Do not insert any object into the Network camera, such as a screwdriver.   

For other safety and regulation information, please refer to “User’s manual”. 

1. Check Contents 

No. Item 

Description 

1 

Network Camera 

ZN-C Series (ZN-C2M / ZN-C1M / ZN-C1) 

2 

Software CD 

User’s Manual, Utility software 

3 

Quick User Guide 

This document 

4 

Accessories 

Tripod mount  

Screws for tripod mount  

C mount adapter ring 

DC jack adapter 

Dust protection cap, 

Terminal block connector 

Allen Wrench 

5 Lens 

(Optional) 

2. Physical Description 

Rear  View                                                                           

1.  Alarm In/Out, Audio In/Out (use terminal block connector) 

2. Video Out 

3.  Micro SD card (SDHC supported)