Ganz ZN-D100VE Quick User Manual - page 2
2010/2‐1
2
Installation
1)
Connect the LAN cable and power
supply cable with the camera. For the
detailed information, please refer to
the Step2.
2)
Place the installation template
(which is included in the package) on
the ceiling.
3)
Drill two holes on the template and
insert anchor blocks into the holes.
Fasten the camera with screws.
4)
Put the dome cover on the main
body of the camera. Make sure the
main body and the cover fit each other
into place.
When assembling the main body of the
camera
and its dome cover, make sure they fit
each other into place.
The
camera
may fall off the ceiling even after the proper installation and mounting. To
prevent any accident, make sure the ceiling is firm and stable enough to support the
camera
. If any reinforcement is needed, consult with your safety personnel and proceed
with the installation.
Caution
!