- DL manuals
- Ganz
- Security Camera
- ZN-M2AF
- User Manual
Ganz ZN-M2AF User Manual - 5. Analog Output
PixelPro Series ZN-M2AF
User’s Manual
10-2014-A
12
5. Analog output
Toggle
menu changed to “ON/OFF” from FW1558 and later.
5.1 Analog Output Setup
Toggle the Analog video output to
“ON/OFF” from BNC output of the camera.
Analog output allows selection of Video output format from BNC output of the camera.
NTSC, PAL: Analog Output is selectable.
This Analog Video Format menu moved to “Codec” page from FW1558 and later.
6. Video
The following descriptions show examples of some of the features available in the
GANZ PixelPro.
6.1 Codec
These are the tools for adjusting the H.264 settings and controlling the video bit rate.
Summary of ZN-M2AF
Page 1
Pixelpro series zn-m2af user’s manual 10-2014-a 0
Page 2: Safety Instructions
Pixelpro series zn-m2af user’s manual 10-2014-a 1 safety instructions 1) read these instructions. 2) keep these instructions. 3) heed all warnings. 4) follow all instructions. 5) do not use this apparatus near water. 6) clean only with a dry cloth. 7) do not block any of the ventilation openings. In...
Page 3
Pixelpro series zn-m2af user’s manual 10-2014-a 2 caution: danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock does not perform any se...
Page 4
Pixelpro series zn-m2af user’s manual 10-2014-a 3 contents 1. Product features ............................................................................................................................ 5 2. Installation .................................................................................
Page 5
Pixelpro series zn-m2af user’s manual 10-2014-a 4 12. Dimensions ....................................................................................................................................... 35 13. Specifications ................................................................................
Page 6
Pixelpro series zn-m2af user’s manual 10-2014-a 5 1. Product features the ganz pixelpro series (zn-m2af) is a high performance h.264 network camera, designed for demanding security installations. It delivers crisp, clear images, disclosing every detail, thanks to its top quality megapixel progressiv...
Page 7
Pixelpro series zn-m2af user’s manual 10-2014-a 6 1. Network (rj-45 poe required) the zn-m2af connects to the network via a standard network cable, and automatically detects the speed of the local network segment (10baset/100basetx ethernet). This socket must be used to power the zn-m2af via power o...
Page 8: 3. Accessing The Camera
Pixelpro series zn-m2af user’s manual 10-2014-a 7 3. Accessing the camera follow the instructions in the ganz pixelpro installation guide to install the camera. The ganz pixelpro could be accessed with most standard operating systems and browsers. The recommended browser is internet explorer for win...
Page 9
Pixelpro series zn-m2af user’s manual 10-2014-a 8 3.2 accessing the camera from the internet once installed, the camera is accessible on the local network (lan). Configure the router/firewall to allow incoming data traffic to access the camera from the internet. For security reasons this is usually ...
Page 10
Pixelpro series zn-m2af user’s manual 10-2014-a 9 3.4 the live view page digital zoom snap shot full screen video stream change: first stream second stream play: click this button by manually to start the stream stop: click this button by manually to stop streaming note: it is possible that not al...
Page 11
Pixelpro series zn-m2af user’s manual 10-2014-a 10 3.5 video stream types h.264 protocols and communication methods • rtp (real-time transport protocol) is a protocol that allows programs to manage the real-time transmission of multimedia data, via unicast or multicast. • rtsp (real time streaming p...
Page 12: 4. The Setup
Pixelpro series zn-m2af user’s manual 10-2014-a 11 rtp/rtsp/unicasting should be used for video-on-demand broadcasting, so that there is no video traffic on the network until a client connects and requests the stream. However, as more and more unicast clients get connected, the traffic on the networ...
Page 13: 5. Analog Output
Pixelpro series zn-m2af user’s manual 10-2014-a 12 5. Analog output toggle menu changed to “on/off” from fw1558 and later. 5.1 analog output setup toggle the analog video output to “on/off” from bnc output of the camera. Analog output allows selection of video output format from bnc output of the ca...
Page 14
Pixelpro series zn-m2af user’s manual 10-2014-a 13 h.264 this is a video compression standard that makes good use of bandwidth and which could provide high-quality video streams at less than 1 mbit/s. The h.264 standard provides scope for a large range of different coding tools for use by various ap...
Page 15
Pixelpro series zn-m2af user’s manual 10-2014-a 14 analog video format analog outputallows selection of video output format from bnc output of the camera. Ntsc, pal: analog output is selectable. Anti-flicker mode (flicker less mode) moved to “camera” setup menu from fw1558 and later. 60hz:ntsc 50hz:...
Page 16
Pixelpro series zn-m2af user’s manual 10-2014-a 15 6.2 camera this section allows you to adjust various camera settings. 6.2.1 exposure control exposure mode auto: use this settings for automatic exposure control. Manual: use these settings to control camera exposure manually. Auto (motion priority)...
Page 17
Pixelpro series zn-m2af user’s manual 10-2014-a 16 max shutter speed slowest shutter speed can be selected from the menu. *this function is available from fw1558 and later. Anti-flicker mode (flicker less mode) anti-flicker mode can be set to 60hz, 50hz or off. 60hz: ntsc 50hz: pal or flicker-free m...
Page 18
Pixelpro series zn-m2af user’s manual 10-2014-a 17 6.2.3 white balance control wb (white balance) mode wb mode can be set to auto, auto (wide mode), custom (one-shot mode), wb hold or manual. “custom” / “wb hold” functions are available from fw1558 and later. Auto: atw (auto tracking white balance) ...
Page 19
Pixelpro series zn-m2af user’s manual 10-2014-a 18 7. Live 7.1 setup the ganz pixelpro could support 10 simultaneous users. In case of multicast, the ganz pixelpro could support unlimited number of users. If supported on the network, consider using multicasting, as the bandwidth consumption will be ...
Page 20
Pixelpro series zn-m2af user’s manual 10-2014-a 19 7.2 privacy masking this uses masking to hide sections that you do not want to appear in the shooting screen. Maximum 2 locations can be hidden with color. Mask area all view:shows the masking area both area 1 and 2. Click the masking area 1 or 2 to...
Page 21
Pixelpro series zn-m2af user’s manual 10-2014-a 20 8. Ftp 8.1 ftp > config server configuration (this function is n/a on this model) external server configuration it is setting page to transmit the still shot to remote sites, using the ftp server. Specify the external ftp server information such as ...
Page 22
Pixelpro series zn-m2af user’s manual 10-2014-a 21 event ftp sending it enables ftp transmission triggered by event. Directory : this folder will be created into external ftp server automatically. File prefix : the file name will start from this prefix. Mapping : you can specify event mapping for ev...
Page 23
Pixelpro series zn-m2af user’s manual 10-2014-a 22 9. Event 9.1 event > motion motion detection motion detection is used to generate an alarm event with analyzes the video whenever objects movements occurs in the video image. Maximum 4 windows can be configured. Area sensitivity:1(low) ~ 10(high) – ...
Page 24
Pixelpro series zn-m2af user’s manual 10-2014-a 23 9.2 event > tamper detection tamper detection camera detects the tampering with analyzes the video image. When the camera angle is moved, covered or sprayed to the lens, defocusing severely, it can be triggered to an alarm event. Tamper detection ca...
Page 25
Pixelpro series zn-m2af user’s manual 10-2014-a 24 10. Network 10.1 network > ip setup network settings click the setup > network > ip setup to see the current network settings. Ip address configuration - the ganz pixelpro supports both ip version 4 and ip version 6 (ipv6 will be supported in v3.00)...
Page 26
Pixelpro series zn-m2af user’s manual 10-2014-a 25 how to assign ip address default setting is set to “dhcp” and “upnp” function is set to on. If your network has dhcp server and upnp function is enabled on your pc, you can find the network camera in “my network”. If dhcp server is not available in ...
Page 27
Pixelpro series zn-m2af user’s manual 10-2014-a 26 10.2 network > service port service port http port- the default http port number (80) could be changed to any port within the range 1-65535. This is useful for simple port mapping. Rtsp port- the rtsp protocol allows a connecting client to start an ...
Page 28
Pixelpro series zn-m2af user’s manual 10-2014-a 27 10.4 network > e-mail you must turn notification to ‘on’ and then enter the host names or addresses for your mail servers in the fields provided, to enable the sending of event and error email messages from the camera to predefined addresses via smt...
Page 29
Pixelpro series zn-m2af user’s manual 10-2014-a 28 10.5 network > ddns how to setup the ddns: 1) ddns set to on. “mac address.Dvrlink.Net” is registered to the ddns server. User can connect to the camera with: “http://mac address.Dvrlink.Net”. 2) ddns set to on and user inputs “user-defined name”. “...
Page 30
Pixelpro series zn-m2af user’s manual 10-2014-a 29 10.6 network > upnp universal plug & play (upnp) allows you to find the ip camera automatically on your network. In order to be able to detect the camera automatically, you must enable the upnp function on both the camera and on your pc. Camera : se...
Page 31
Pixelpro series zn-m2af user’s manual 10-2014-a 30 select “network services” and click “details”. Then select “upnp user interface” 11. System 11.1 system > user access the camera and the configure root password dialog appears. Enter the user name: admin and password is 1234. To changed password or ...
Page 32
Pixelpro series zn-m2af user’s manual 10-2014-a 31 11.2 system > date & time date & time format - specify the formats for the date and time (12h or 24h) displayed in the live view video streams. Use the predefined formats or use your own custom date and time formats. Network time server - the camera...
Page 33
Pixelpro series zn-m2af user’s manual 10-2014-a 32 11.3 system > maintenance system name choose a system name to identify the camera when using e-mail notifications. System reboot reboot the camera. Factory default to reset the camera settings to the original factory default settings. Enable firmwar...
Page 34
Pixelpro series zn-m2af user’s manual 10-2014-a 33 3) when firmware upgrade menu is displayed, browse to the desired firmware file on your computer. Click ok. Note: do not disconnect power to the unit during the upgrade. The unit will restart automatically after the upgrade has completed. (1~5 minut...
Page 35
Pixelpro series zn-m2af user’s manual 10-2014-a 34 11.4 system > information system information you can confirm the system information about the camera here..
Page 36
Pixelpro series zn-m2af user’s manual 10-2014-a 35 12. Dimensions.
Page 37
Pixelpro series zn-m2af user’s manual 10-2014-a 36 13. Specifications product features h.264 / mjpeg network camera dual stream motion triggered alarm multi language gui support onvif compliant 1/2.8" sony imx036 cmos sensor on the fly supported @ gop/bitrate/fps stetting 2d dnr. (depends on codec c...
Page 38
Pixelpro series zn-m2af user’s manual 10-2014-a 37 network network 10base-t, 100base-tx, rj45 image compression h.264 mjpeg : image quality: 100 steps(q value) resolution 1920 x 1080(full hd), 1280 x 1024(sxga), 1024x768(xga), 1280 x 720(720p) 640 x 480(vga), 640 x 360(hvgaw), 320 x 240(qvga) 704x48...
Page 39
Pixelpro series zn-m2af user’s manual 10-2014-a 38.
Page 40
Pixelpro series zn-m2af user’s manual 10-2014-a 39.
Page 41
Pixelpro series zn-m2af user’s manual 10-2014-a 40
Page 42
Pixelpro series zn-m2af user’s manual 10-2014-a 41.
Page 43
Pixelpro series zn-m2af user’s manual 10-2014-a 42 revision history rev# date(m/d/y) comments 06-2014-a 06/17/2014 revised all the pages added specifications modified to true day & night 10-2014-a 10/30/2014 additions and revisions for new fw(1558). Minor update on some pages..