Summary of ZN-NH11VP(N)E
Page 2: Information To User
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 2 information to user caution risk of electric shock, do not open ! Caution: to reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified seerivce personel. This sy...
Page 3
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 3 table of contents 1. Features ............................................................................................................... 5 2. Package contents ........................................................................
Page 4
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 4 support.................................................................................................................................... 25.
Page 5
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 5 1. Features camera • box type ip camera • sony 1/3” super had ccd & high quality ss‐hq1 full kit chip set sony 1/3" vertical double density color ccd (optional) • true day / night (icr) and wdr (optional) streaming • dual streaming m...
Page 6
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 6 2. Package contents unpack carefully and handle the equipment with care. The packaging contains: zn‐y11ve/zn‐nh11ve/zn‐nhw11ve dc power adaptor mount ring 9 pin terminal block rubber cap (for protecting ccd) hex wrench driver adaptor...
Page 7
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 7 3. Part names 3.1. Rear view 3.2. Bottom view ○ 6 ○ 5 ○ 3 ○ 1 ○ 2 ○ 4 ○ 8 ○ 7 ethernet micro sd reset loop out rs-485 do di audio - + c 1 c 1 out in ○ 9.
Page 8
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 8 ① analog video out it is an analog video output port. ② reset reset switch is used for restarting zn‐y11ve/zn‐nh11ve/zn‐nhw11ve or resetting zn‐ y11ve/zn‐nh11ve/zn‐nhw11ve as factory default (fd). Refer to the section “6.3. Reset” fo...
Page 9
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 9 ⑧ 4 pin connector for auto iris only dc‐drive type is supported. Refer to the section “4.2. Installing an auto iris lens” for more specific information. ⑨ adaptor for mounting the camera mounting points adaptor is provided on the bot...
Page 10
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 10 4. Installation 4.1. Installing a c/cs mounting lens 1. Remove the protective rubber cap from the front of the camera. 2. Install the mount ring for lens and adjust the mount ring to fit c or cs lens. 3. Tighten the setscrews using ...
Page 11
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 11 4 pin connector for iris pin dc iris lens 1 damp‐ 2 damp+ 3 drive+_ 4 drive‐ 4.3. Setting the image attribute you can set the image attribute of camera through the webpage. The menu of image attribute can be seen under setup > video...
Page 12
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 12 5. Connections caution ! When connecting the dc power supply, make sure the polarity is correct. Incorrect connection may cause malfunction or damage to the camera. Dc jack adaptor lan cable 4 pin connector for iris analog video out...
Page 13
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 13 5.1.Connectors ① 9 pin terminal block ② rs‐485 the rs‐485 serial port consists of trx+(rx+) and trx‐(rx‐) as following the following image. Rs‐485 connection ③ sensor (di) connection zn‐y11ve/zn‐nh11ve/zn‐nhw11ve provides 1 channel ...
Page 14
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 14 ④ alarm (do) connection only the relay type is supported. Relay rating: max 24vac 500ma or 12vdc 1a caution ! Do not exceed the maximum relay rating. ⑤ audio connection zn‐y11ve/zn‐nh11ve/zn‐nhw11ve has a mono audio input and a mono...
Page 15: ‐
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 15 ⑥ power adaptor connector (dc 12v) power adaptor connector connects to dc jack adapter cable. Caution ! Make sure the polarity is correct. Incorrect connection may cause malfunction or damage to the ip device caution ! Power adaptor...
Page 16
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 16 6. Configuration 6.1.Set up network environment the default ip address of your ip device is 192.168.Xxx.Xxx. You can find the available ip address from the mac address of your device. Please make sure the device and your pc are on t...
Page 17
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 17 to use the zns‐git ipadmintool and view the live video on a web page: 1. Start zns‐git ipadmintool. Names and info of currently activated devices appear as a list. 2. Right‐click on the desired device and select web view. 3. Select ...
Page 18
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 18 5. Wait for a few seconds while the web page loads. The live video is displayed as below. 6. If the live video is not displayed and “can not create xmldomdocument install msxml4.0” message is shown as below, please download and inst...
Page 19
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 19 6.2.2. View video using ip address view the live video on a web page using your ip device and its ip address. To have the correct ip address ready and use it on a web page: 1. Convert a mac address to an ip address or check the ip a...
Page 20
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 20 appendix (a): specifications summary camera module model zn‐y11ve /zn‐nh11ve zn‐nhw11ve image sensor sony 1/3” super had ccd, 410k pixel sony 1/3" vertical double density color ccd effective pixels ntsc: 768(h) x 494(v) pal: 752(h) ...
Page 21
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 21 compression format h.264, mpeg‐4, mjpeg selectable per stream number of streams dual stream, configurable resolution d1, 4cif, vga, cif, qcif, qvga compression fps 25/30 fps@d1 (pal/ntsc) deinterlacing supported (dsp) motion detecti...
Page 22
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 22 vca presence (included as standard) high performance advanced tracking algorithm, low false alarm rate easy to use intuitive web browser interface detection zones multi‐segment polygons and lines on‐screen display real‐time display ...
Page 23
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 23 appendix (b): power over ethernet the power over ethernet(poe) is designed to extract power from a conventional twisted pair category 5 ethernet cable, conforming to the ieee 802.3af power‐over‐ethernet (poe) standard. Ieee 802.3af ...
Page 24
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 24 appendix (c): dimensions h.264 network camera 94.2 91.4 55 55 top view front view rear view right side view unit: mm ethernet micro sd reset loop out rs-485 do di audio - + c 1 c 1 out in.
Page 25
Zc‐y11ve/zn‐nh11ve/zn‐nhw11ve installation guide 2010/2‐1 03a.02 25 appendix (e): trouble shooting checking your firmware firmware is software that determines the functionality of the device. One of your first actions when troubleshooting a problem should be to check the currently installed version....