Gardena AccuCut Li 9851-20 Operation Instructions Manual - page 7
– before checking, cleaning or working on the unit;
– if you hit an object. Do not use your unit until you are
sure that the entire unit is in a safe operating condition;
– if the unit starts to vibrate abnormally. Check immedi-
ately. Excessive vibration can cause injury.
– before passing to another person.
Only use the unit between 0 – 40 °C.
Battery safety
FIRE RISK!
The battery to be charged must be placed on a non-flam-
mable, heat resistant and nonconductive surface while
charging.
Keep corrosive, flammable and easily combustible objects
clear of the battery charger and the battery.
Do not cover the battery charger and the battery while
charging.
Unplug the battery charger immediately in the event of
smoke formation or fire.
Only use the original GARDENA Battery Charger for charg-
ing. The use of other battery chargers may damage the
batteries irreparably and even cause a fire.
RISK OF EXPLOSION!
v
Protect unit from heat and fire. Do not leave on radiators
or expose to strong sunshine for long periods.
Do not use the battery charger outdoors.
Protect the battery charger from damp or wet areas.
Only use the battery in an ambient temperature between
−10 °C and + 45 °C.
A non-functioning battery must be disposed of correctly.
It may not be sent via post. For further details, please con-
tact your local disposal com panies.
The battery charger should be checked regularly for signs
of damage or ageing (brittleness) and may only be used if
it is in perfect condition.
The charger unit provided may only be used to charge the
rechargeable batteries supplied with the unit.
Non-rechargeable batteries must not be charged with this
battery charger (danger of fire).
The unit must not be operated during charging.
After charging, disconnect the charger from the mains and
from the battery.
Only charge battery between 10 – 45 °C.
After heavy duty service allow battery to cool down
first.
Maintenance and storage
RISK OF INJURY!
Do not touch blades.
v
When finishing or interrupting work push up
protection cover.
Keep all nuts, bolts and screws secure to be sure the unit
is in safe working condition.
GB
7