Gardena C 1030 plus Operating Instructions Manual - page 4
4
GB
You can change the display level at any time, even during pro-
gramming. All the programme data which have been confirmed
up to that point with the OK key are stored.
Display Description
5
Weekdays
Current weekday or programmed
(Mo), (Tu), ...
watering days.
6
Time
Current time of day (flashes when in
input mode).
7
am / pm
Display for 12 hour clock (e. g. in USA,
Canada).
8
Start Prog
Watering start time (flashes when in
input mode).
9
Run Time
Watering duration (flashes when in input
mode).
0
8h, 12h, 24h,
Watering cycle (with drop symbol
2nd, 3rd, 7th
activated). Every 8 / 12 / 24 hours;
every 2nd / 3rd / 7th day.
A
Prog
ON
/
OFF
Watering programme on (
ON
) / off (
OFF
).
B
Automatic
Watering is controlled automatically via
mode sensor
the sensor.
C
Sensor
Dry sensor ON : watering is carried out.
ON / OFF
Wet sensor OFF : watering is not carried
out.
D
Battery
Indicates 5 battery levels :
D
A
7
5
9
C
B
8 6
0
Display
3 Bars
2 Bars
1 Bar
1 Bar flashing
0 Bar
Battery full
Battery half full
Battery low
Battery almost flat
Battery flat
Valve opens.
Valve opens.
Valve opens.
Valve still opens.
Valve does not open.
The Water Computer
The Water Computer
The Water Computer The Water Computer
The Water Computer
is guaranteed to
is guaranteed to
will continue to work stops working soon.
stops working.
work for at least
work for a minimum
for no more than
½
year yet.
of 4 more weeks.
4 weeks.
It is advisable to
The battery must be
The battery must be
change the battery.
changed soon.
changed.
If no bars are displayed, the valve is no longer opened. A valve
opened by the programme will also close again if the battery
is flat. The battery display is reset when the battery is changed.
v Replace battery (see 4. Putting Your Water Computer into
Operation
“Inserting battery” ).