Gardena HiCut 4019 Operating Instructions Manual - 7. Maintenance
5
GB
Cleaning the mower :
7. Maintenance
DANGER !
A
Cutting tool can cause injuries !
V Wear suitable work gloves when undertaking
maintenance.
WARNING !
A
Damage to cylinder lawnmower.
V Never clean your cylinder mower with running
water, in particular with water under high
pressure.
Deposits affect the cutting result as well as discharge of grass
clippings. Residual dirt and grass is easily removed immediately
after mowing.
1. Remove grass deposits with a brush and a cloth.
2. Oil the red cutting mechanism lightly with low viscosity oil
(e.g. sprayed oil).
8. Troubleshooting
DANGER !
A
Danger of injury from the cutting tool !
V Wear suitable work gloves when rectifying
faults.
Fault
Possible Cause
Rectification
Abnormal Noises
Screws / components loose.
v Tighten screws.
Foreign bodies on the blade.
v Remove foreign bodies.
Notch in the blade.
v Remove notches with
grindstone.
Lawn is not cleanly cut
Blade adjustment incorrect.
v Adjust cutting mechanism.
Cutting mechanism blunt.
Recommendation:
v Have cutting mechanism
reground or replaced by
GARDENA Service.
Lawn too long or damp.
v See 4. Function “Mowing
Tips”.
Wheels slip on the earth /
Grass too long or too damp.
v Raise cutting height.
Very difficult to push
Blades strike each other
v Adjust cutting mechanism.
too hard.