Gardena SR 1600 Operating Instructions Manual - 4. Assembly
12
GB
z
2a
2
9
7
6
8
Fitting the Pond Silt Remover /
Wet Suction Unit /
Dry Suction Unit :
Applications of the various adapter nozzles
For sucking pond silt up from the bottom of the pond.
The bottom nozzle can be adjusted to suit the conditions at the
bottom of the pond :
• Bottom nozzle fully open (10 mm): use on pond liners (no
pebbles on the bottom, thick layer of silt).
• Bottom nozzle closed (2 mm): use on pond liners (pebbles as
bottom covering, thick layer of silt).
For optimum suction in rigid pond liners and of thin layers of silt,
turn the bottom nozzle through 180°.
Joints nozzle
For sucking from narrow spaces, such as between stones and
plants.
Thread algae nozzle
For sucking up thread algae.
Wide nozzle with
For sucking up residual water e.g. on terraces, in garages,
rubber lip
cellar etc.
4. Assembly
1. Undo the filter tray locks
6
and remove the motor housing
7
.
2. Remove all parts from the filter tray
3
.
3. Replace the motor housing
7
and lock it in position.
4. Insert the end piece of the suction hose
8
into the upper
suction opening of the filter tray
3
.
5. Attach the transparent suction tube
z
2a
to the handle
9
.
6. Attach the black suction tubes
2
.
Bottom nozzle
3