Gardenline 36357 User Manual - page 9
S
U
A
1800 909 909
www.globalpowerbrands.com email: help@globalpowerbrands.com
AFTER SALES SUPPORT
36357
S
U
A
1800 909 909
www.globalpowerbrands.com email: help@globalpowerbrands.com
AFTER SALES SUPPORT
36357
9
• Only operate the tool during broad daylight or with adequate artificial light.
• When the tool is not in use, store it in a dry place and out of reach of children.
• After use, disconnect the tool from the power supply and check for damage. If
you have the slightest doubts, contact an authorised service centre.
• Only use the tool according to the instructions given in this manual.
• Check regularly that the screws are tight.
• Use only spare parts and accessories recommended by the manufacturer.
• Do not try to repair the tool or access internal parts. Contact authorised service
centres only.
• This wheeled vacuum/blower device mainly serves to clean hard surfaces as paved
paths courtyards and terraces. It is only suitable for vacuuming or blowing dry,
light material as grass, leaves, small twigs and pieces of paper. The vacuuming
of heavy materials as metal, stones, branches, broken glass and wet leaves is
expressly excluded.
• If operating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected supply with a residual tripping current of 30mA or less.
Use of an RCD reduces the risk of electric shock.
• Always use weatherproof extension cable with high performance insulation
approved for outdoor use.
• This wheeled vacuum/blower is designed to operate on smooth hard surfaces
such as paved and concrete area’s, it can also be used on short kept lawns. It is
only suitable for vacuuming or blowing dry, light material as grass, leaves, small
twigs and pieces of paper. The vacuuming of heavy and solid materials such as
metal, stones, branches, broken glass and wet leaves will damage the internal
mechanism and void warranty.
WARNING.
We recommend the use of a residual current device with a residual
current rating of 30mA or less.
General Information & Safety Instructions
2