1. DL manuals
  2. Gardenline
  3. Trimmer
  4. LT26
  5. User Manual

Gardenline LT26 User Manual

Summary of LT26

  • Page 1

    After sales support now you have purchased a gardenline ® product you can rest assured in the knowledge that as well as your 3 year parts and labour guarantee you have the added peace of mind of dedicated helplines and web support 26cc petrol line trimmer user guide after sales support 1800 909 909 ...

  • Page 2: Contents

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 2 contents 03 warranty 03 introduction 03 environmental protection 04 description of symbols 05 specifications 06 safety instructions 08 additional safety rules for petrol line trimmers 09 parts ...

  • Page 3: Introduction

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 3 introduction your new gardenline ® line trimmer will more than satisfy your expectations. It has been manufactured under stringent gardenline ® quality standards to meet superior performance cr...

  • Page 4: Description of Symbols

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 4 description of symbols the rating plate on your tool may show symbols. These represent important information about the product or instructions on its use. Conforms to relevant standards for ele...

  • Page 5: Specifications

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 5 2 general information & safety instructions specifications engine: 26cc, 2 stroke max. Speed: 8500min -1 cutting diameter (swathe): 380mm line thickness: 2mm spool type: bump feed, twin line fu...

  • Page 6: Safety Instructions

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 6 2 safety instructions warning read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power too...

  • Page 7

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 7 2 power tool use and care • do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was de...

  • Page 8

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 8 additional safety rules for petrol line trimmers • do not operate in a hazardous location. Such areas include where there is a risk of explosion of petrol fumes, leaking gas or explosive dust. ...

  • Page 9: Parts List

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 9 1. Cutting line spool and assembly 2. Cut off knife 3. Safety guard 4. Handle 5a. Upper shaft 5b. Lower shaft 6. Recoil starter 7. Ignition on/off switch 8. Fuel tank 9. Throttle trigger 10. Pr...

  • Page 10: Getting Started

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 10 getting started 4 unpacking due to modern mass production techniques, it is unlikely that your petrol line trimmer is faulty or that a part is missing. If you find anything wrong, do not opera...

  • Page 11: Instructions

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 11 2. Place the hex nut into the hex shape recess on the guard. Slide the screw through the side of the safety guard and tighten with the hex key provided. Joining the shaft 1. Depress the locati...

  • Page 12: Instructions

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 12 5 fitting and adjusting the secondary handle warning. Before each use, ensure the secondary handle cannot swivel by checking the two handle clamp screws are tight and the handle is firm. 1. Th...

  • Page 13: Mixing The Fuel

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 13 5 mixing the fuel motor fuel: mix at 40:1 only for example: for 1 litre of unleaded petrol add 25ml of oil. For 5 litres of unleaded petrol add 125ml of oil. Important. Use good quality air co...

  • Page 14: Filling The Tank

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 14 s u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 filling the tank warning. Always shut off the engine before fuelling. Never add fuel to...

  • Page 15: Starting The Line Trimmer

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 15 starting the line trimmer choke control start position (choke closed). Run position (choke open). 1. Press the ignition switch (7) to the ‘on’ position marked with an “i”. 2. Move the red chok...

  • Page 16: Stopping The Line Trimmer

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 16 7. Once the engine is fully warm ensure the choke (red lever) is down fully to the run position (warm start) and pull the throttle trigger and release. This will release the throttle lock. 8. ...

  • Page 17: Running In The Engine

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 17 running in the engine 1. During the first 2–3 hours of work, run the engine at a moderate rpm. 2. We advise you in any case not to maintain your engine at a high speed as the different compone...

  • Page 18: Feeding The Line

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 18 note. If grass becomes wrapped around the spool, stop the engine, disconnect the spark plug wire, and remove the grass. Note. Prolonged cutting not at full throttle may result in oil dripping ...

  • Page 19: Advancing The Line Manually

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 19 advancing the line manually 1. Push the bump knob in while pulling on both lines to manually advance the line. 2. Release the bump knob and again pull on both lines to advance the line further...

  • Page 20: Maintenance

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 20 9. With the spring fitted onto the shaft of the spool holder insert the spool back into the holder. As you insert the spool, thread the lines through the eyelets and pull firmly to disengage f...

  • Page 21: Instructions

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 21 5 instructions • heavy deposits should be washed out in suitable detergent. • squeeze out the remaining water an allow the filter to completely dry. • add a drop of thin oil to the filter and ...

  • Page 22: Instructions

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 22 5 instructions storage and maintenance after use • when you finish working, clean the petrol line trimmer completely, making sure there is no grass or dirt wrapped in the cutting tools, and pu...

  • Page 23: Instructions

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 23 5 instructions accessories should you find the following accessories are worn or past their user life, replacements can be purchased online via our website www.Extrabattery.Com • spool & line ...

  • Page 24

    S u a 1800 909 909 www.Globalpowerbrands.Com email: help@globalpowerbrands.Com after sales support 43670 24 after sales support 1800 909 909 www.Powertoolsupport.Com model: lt26 product code: 43670 10/2014 year warranty 2 aus.