Garland Mealstream 501 Installation And Operating Instructions Manual - page 15
15
MENU KEY : CHANGING OVEN MENU PROGRAMS
1
2
3
Lift the MENU KEY cover in the
front panel of the oven and put
the key in the keyhole
Turn the key clockwise to the
stop ( ¼ turn ).
Do not remove the Menu key
at this stage.
The MENU KEY System automatically changes all the cooking programs
with the turn of a key.
To change the menus on the oven:
Ensure the power switch is off.
Switch the power switch on.
The oven will now go through the
program download sequence by
displaying the following:
The Menu Key Code.
The number of programs and
each program number on the
key.
The programs then count down
to 00.
When the display shows 00:00,
remove the Menu key and close
the cover. The oven is now ready
to use with the new programs.
To confirm the download is successful
Switch off the oven.
Switch on and the display briefly will show the following:
1. The new menu key code
2. 00:00 (oven ready to use)
EPS - FAIL - REDO
External Program System
ERROR.
If the key is removed before the
download is complete or the
process is interupted the display
shows “EPS” then “FAIL” then
“REDO”.Switch oven off and
begin the MENU KEY download
again.
example:
Key 02
example:
27 programs
Ensure that the Menu key is removed once the oven has been
programed.