Garland MERCO Savory MHC-22-TDL Installation And Operation Manual - page 7
7
If no other changes need to be made, press and hold the “Program” (green) button until you hear a
short, double-beep sound. This saves any changes that were made to the selected product and
exits programming mode. IF ADDITIONAL CHANGES ARE NEEDED, continue to STEP 7 prior to
saving.
7
Access Product Name
Programming
While in product programming mode, press the top
left “bin” button to reach “product name edit” mode.
All but first character in the name will begin
flashing.
8
Edit product name
To edit first character (the one not flashing), press
the “Up” or “Down” arrow (dark blue) button. To
access other characters, press the bottom “bin” (left
or right) buttons. Now press “Up” or “Down” arrow
(dark blue) buttons to change characters.
If no other changes need to be made, press and hold the “Program” (green) button until you hear a
short, double-beep sound. This saves any changes that were made to the selected product and
exits programming mode. Step 8 completes all available changes to product programming.
DIAGNOSTIC MODE
To reset the holding bin controller to the factory configuration, hold down the upper left “bin” button
while powering on the controller. Release as soon as displays come on. This resets the following
settings:
• AM and PM menus
• All product names
• Upper and Lower temperature for each product
• “Expiration” and “Cook More” time for each product
CLEANING AND MAINTENANCE
Warning: Be sure to push “Power On / Power Off” button to the “off” position. Green “power”
button will no longer be illuminated in “off” position. Prior to cleaning, unplug unit and ensure that it
has been given sufficient time to cool down.
Merco Holding Cabinets are designed for easy cleaning and minimum maintenance. The stainless
steel outer case requires nothing more than a daily wiping with a damp cloth. If, however, an
excessive amount of food particles / grease are allowed to collect, a non-abrasive cleaner (hot
sudsy water) may be used. Care must be taken to prevent water or cleaning compounds from
getting on internal parts, especially the switches on the control panel.
HOW TO OBTAIN SERVICE
Please contact Garland Commercial Ranges at (905) 624-0260 with questions or concerns relating
to this product.