Garland MONTANA FIRST Instruction Manual - Índex
English
32/172
English
33/172
1. Introduction
32
2. Normative and security measures
33
3. Warning icons
42
4. Machine symbols
42
5. Machine description
43
6. Start up instructions
45
7. Using the machine
49
8. Maintenance and service
53
9. Trouble shooting
57
10. Transport
59
11. Storage
59
12. Recycling
59
13. Warranty conditions
60
CE Declaration of conformity
61
Thank you for choosing a Garland machine. We are
sure that you will appreciate the quality and functions
of this machine that will facilitate your daily work for
a long time. Remember that this machine has a wide
of network of after sales services to which you can
take your machine for any maintenance necessary on
your machine, in case of any troubleshooting and for
purchasing spare parts and accessories.
SAFETY COMES FIRST.
Attention! Read all the warning signs and
all the instructions.
The non observance
of the warning and instructions detailed
from here on can result in a fire being caused and/
or a serious injury. Before using the machine, read
carefully the information in this manual on a secure
and correct start up.
Only cut wood.
Do not use the machine for any
other use. For example: do not use the machine to
cut plastic materials, bricks and other construction
materials that are not wooden. The use of the machine
for other uses could cause dangerous situations.
To avoid an incorrect use of the machine read all
the instruction manual before using the machine for
the first time. All information included in this manual
is relevant for your personal security, that of others,
animals and other objects surrounding you. If you
have any doubts about the information in this manual
please ask an expert or go back to where you bought
the machine and ask.
Keep all the warning signs and the manual
in a safe place for future reference. If you sell or
otherwise dispose of the machine, please pass on the
instruction manual as it forms part of the machine.
Ref.:GMSMONTANAFIRSTM1014V2
DATE OF PUBLICATION: 23/10/2014
DATE OF REVISION:
23/10/2014
TRANSLATION OF THE ORIGINAL INSTRUCTIONS