Garland MONTANA FIRST Instruction Manual - 3. Warning Symbols
English
40/172
English
41/172
3. WARNING SYMBOLS
The warning labels which figure below accompany
the important information about the product or the
instructions for use.
4. MACHINE SYMBOLS
To ensure safe operating and maintenance, the
symbols are embossed on the tool.
Positions of the ignition switch. Located on the left
side of the machine.
The warning labels which figure below
accompany the important information about
the product or the instructions for use.
Warning and caution.
You must read this manual carefully before
using this machine.
Use eye and ear protection at all times.
Danger of kickback.
Fuel tank. Located on the tank cap.
MIX 2.5% (PETROL 40: OIL 1).
Chain oil tank. Located on the tank cap.
“O” = ignition off (the tool will not
operate)
“I” = ignition on (the tool can operate).)
“H” = High revolution adjustment screw.
“L”= Low revolution adjustment screw.
“T” = Idle adjust nut.
Direction of installing the cutting chain
Indicator.
¡Never use only petrol or petrol in a bad
condition!. Use new lead free 95º petrol
and 100% synthetic oil for two stroke
engines. Engine fuel: mix (petrol 40:
oil 1) 2,5%.
Use this tool with both hands.
Chain oil flow adjustment.
White Arrow = Brake not activated
(Normal operating position)
Black Arrow = Brake activated
Chain brake position:
Choke lever positions::
Pull the Choke to close the air
passage. Push the Choke to open
the airway. Located on the right
side of the machine.
PUSH
PULL