Garland MWE-9501 Operation Manual - page 27
To Change the Sear Time
The following procedure IS ONLY AVAILABLE and can
only be changed in FLAT MENU ITEMS.
1. PRESS and HOLD the “PROG” button for five, 5
seconds. The display will flash the version number.
2. PRESS the “PROG” button one time to display “MENU
ITEMS”.
3. PRESS the “MENU” button to display the menu you
want to adjust.
4. PRESS the “FUNCTION” button until “SEAR IN
XXX” is displayed on the controller.
NOTE: IF SEAR TIME IS NOT DISPLAYED ON THE
CONTROLLER, ENSURE THAT THE CURRENT
PRODUCT SELECTED IS A FLAT MENU ITEM.
5. PRESS the “UP ARROW” button (↑) to change the
value of the flashing digit.
6. PRESS the “RIGHT ARROW” button (→) to advance
the cursor to the right for changing its value.
7. PRESS the “PROG” button to display “MENU
ITEMS”.
8. PRESS the “RIGHT ARROW” button (→) to return to
the normal OPERATING MODE.
The following procedure IS ONLY AVAILABLE and can
only be changed in FLAT MENU ITEMS.
1. PRESS and HOLD the “PROG” button for five, 5
seconds. The display will flash the version number.
2. PRESS the “PROG” button one time to display “MENU
ITEMS”.
3. PRESS
the “MENU” button to display the menu you
want to adjust.
4. PRESS the “FUNCTION” button until “SEAR IN
XXX” is displayed.
NOTE: IF SEAR IN IS NOT DISPLAYED ON THE
CONTROLLER, ENSURE THAT THE CURRENT
PRODUCT SELECTED IS A FLAT MENU ITEM
5. PRESS the “FUNCTION” button 1X. Controller will
display “ALARM (AUTO / MANUAL)”.
To Change the Sear Time Alarm (Auto/Manual)
6. PRESS the “UP ARROW” button (↑) to change the
setting (AUTO/MANUAL).
7. PRESS the “PROG” button to display “MENU
ITEMS”.
8. PRESS the “RIGHT ARROW” button (→) to return to
the normal OPERATING MODE.
To Change the Toast Buns Time
1. PRESS and HOLD the “PROG” button for five, 5
seconds. The display will flash the version number.
2. PRESS the “PROG” button one time to display “MENU
ITEMS”.
3. PRESS the “MENU” button to display the menu you
want to adjust.
4. PRESS the “FUNCTION” button until “TOAST BUNS
IN XXX” is displayed.
5. PRESS the “UP ARROW” button (↑) to change the
value of the flashing digit.
6. PRESS the “RIGHT ARROW” button (→) to advance
the cursor to the right for changing its value.
7. PRESS the “PROG” button to display “MENU
ITEMS”.
8. PRESS the “RIGHT ARROW” button (→) to return to
the normal OPERATING MODE.
To Change the Toast Buns Alarm (Auto/Manul)
1. PRESS and HOLD the “PROG” button for five, 5
seconds. The display will flash the version number.
2. PRESS the “PROG” button one time to display “MENU
ITEMS”.
3. PRESS the “MENU” button to display the menu you
want to adjust.
4. PRESS the “FUNCTION” button until “TOAST BUNS
IN XXX” is displayed.
5. PRESS the “FUNCTION” button 1X until “ALARM” is
displayed.
6. PRESS the “UP ARROW” button (↑) to change the
setting (AUTO/MANUAL).
7. PRESS the “PROG” button to display “MENU
PROGRAMMING