Garland XTRIM FIRST PG Instruction Manual - 3. Warning Symbols
English
26/124
English
27/124
Warninglabelsindicatereuiredinformationfortheuse
of the machine:
In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
Air positions:
3. WARNING SYMBOLS
4. MACHINE SYMBOLS
Warningandcare.
Useprotectivenonskidbootswith
protective steel.
Use appropriate security gloves.
It is necessary to use eye and acoustic
protection at any time.
It is necessary to read this manual
carefully before using this machine.
Attention!: Do not touch the cutting blade.
Caution! Hot Surface.
Do not let people enter in
theworkarea.Thisarea
will be of a diameter of
15 meters from the point
inwhichyouareworking.
Attention!, Danger!: The cutting tool can
project hard objects.
Danger, fire and explosion.
DeFueltank.Locatedinthecombustible
tankcap.Mix2strokeoilandgasoline.
Open = Normal operating position.
Located in the top of the filter.
Position for starting the machine in cold.
Located on the of air filter cover.
Never use only fuel or fuel in a bad
state. Mix unleaded fuel grade 95
andtotallysyntheticoilfor2stroke
enginesto2.5%(40:1).
“I”=On(Themachineisreadytowork).
“O”=Off(Themachinedon´twork).
0
Positions start switch located on the right handle of
the machine:
Rotationforunblockingthenylonhead
(situatedonthenylonhead).
Rotationforblockingthenylonhead(situ-
atedonthenylonhead).