Garland XTRIM FIRST PG Instruction Manual - 6. Start Up Instructions
English
30/124
English
31/124
6.1. LIST OF MATERIALS
This machine includes the following elements that you
will find inside the box:
• Engine.
• Transmission.
• Protector.
• Handle.
• Harness.
• Tooling.
• Instructionmanual.
Ensure that all elements listed above are included
withthemachine.Thankstothequalitycontrolchecks
atthefactoryitishighlyunlikelythatanyelements
will be missing. If you were to find any element
missing, do not use the machine until the defect has
been repaired or the machine is complete.
Using the machine with defective parts or without
all the elements can cause severe personal
damages.
6.2. MOUNTING THE MACHINE
6.2.1. INSTALLATION OF THE HANDLEBAR
Install the handle on the top transmission bar as
shown in the figure placing it at a distance from the
accelerator that is comfortable for you as end user.
Tighten the screw to avoid that the handle moves.
6.2.2 GUARD SUPPORT ASSEMBLY
Place the guard support as shown in the figure. Place
the screw, tighten the nut and tighten.
6.2.3. INSTALLATION OF THE TRANSMISSION
6.2.4 MOUNTING THE NYLON BUMP HEAD
To mount the bump head place part B into the axis
CandthreadnutAclockwise.Toavoidthattheaxis
rotates, hold part B with one hand whilst you press A
with the other hand .