Garmin APOLLO GX 55 User Manual - page 20
Placing the TO Waypoint on Hold
1. Press SEL and move to the TO designation with the Large knob. You can also place
the To waypoint on hold by pressing the external WPT SEQ button, when it is
installed. The HOLD annunciator will light when it is installed.
From EUG arpt
Hold?SLE arpt
Next HIO arpt
2. Turn the Small knob to choose “Hold?” or “To?” Placing the TO waypoint on Hold
suspends waypoint sequencing.
From EUG arpt
To? SLE arpt
Next HIO arpt
3. Press ENTER.
From EUG arpt
Hold SLE arpt
Next HIO arpt
Reverse the operation to return to normal sequencing.
Using
Direct-To
Pressing the DIRECT-TO key sets the FROM location as your present position. When
using the Direct-To function, the FROM waypoint identifier is overwritten with the word
“Direct.” If you remove the Direct-To position with the Del? option, the old FROM
waypoint is returned to that position. If you edit the FROM position, Direct-To navigation
will be replaced by the new entered waypoint.
Navigation Basics
14