Garmin Apollo SL30 Installation Manual - page 14
Introduction
6
Apollo SL30 Installation Manual
O
THER
R
EQUIRED
M
ATERIALS
The SL30 is intended for use with standard aviation accessories. External devices required for
various installations are listed below. Depending upon the installation, this will include items
such as:
• back course annunciator
• a CDI or HSI
• a Comm antenna
• NAV antenna
• NAV antenna splitter (if dual SL30)
• a microphone(s)
• a speaker or headphone
• audio panel
S
PECIAL
T
OOLS
R
EQUIRED
Crimp Tool
A crimp tool meeting MIL specification M22520/1-01 and a positioner/locater are required to
ensure consistent, reliable crimp contact connections for the rear 15-pin and 37-pin
connectors. These tools are available from:
For pin P/N 245-0022
Astro Tool Corp.
Phone (503) 642-9853
21615 SW TV Highway
Fax (503) 591-7766
Beaverton, OR 97006
Crimp tool:
Astro Tool part #615708
Positioner:
Astro
Tool
part
#616356
For pin P/N 245-0027
ITT
Cannon
Phone
(714)
261-5300
1851 E. Deere Ave.
Fax
(714) 575-8324
Santa Ana, CA 92705-6500
Insertion tool:
ITT part # 274-7006-000 (Desc. CIET-20HD)
Regular duty Crimp tool:
ITT part #995-0001-585 (Desc. M22520/1-01)
Regular duty Locator tool:
ITT part #995-0001-244 (Desc. TH25)
Heavy duty Crimp tool:
ITT part #995-0001-584 (Desc. M22520/2-01)
Heavy duty Locator tool:
ITT part #995-0001-604 (Desc. M22520/2-08)