Garmin Apollo SL40 Installation Manual - page 10

Introduction 

4 

Apollo SL40 Installation Manual 

O

THER 

R

EQUIRED 

M

ATERIALS

The SL40 is intended for use with standard aviation accessories. The following items are 

required for the installation: 

x  comm antenna with cables 

x  a microphone 

x  a speaker or headphone 

These items may be installed dedicated to the SL40 comm or by connections to an audio 

panel. 

S

PECIAL 

T

OOLS 

R

EQUIRED

Crimp Tool 

A crimp tool meeting MIL specification M22520/1-01 and a positioner/locater are required to 

ensure consistent, reliable crimp contact connections for the rear d-sub connectors. These tools 

are available from: 

For pin p/n 245-0022 

Astro Tool Corp. 

Phone (503) 642-9853 

21615 SW TV Highway 

Fax     (503) 591-7766 

Beaverton, OR 97006 

Crimp tool:   

Astro Tool part #615708 

Positioner: 

   Astro 

Tool 

part 

#616356 

For pin p/n 245-0027 

ITT Cannon   

Phone  (714) 261-5300 

1851 E. Deere Ave.    

Fax 

(714) 575-8324 

Santa Ana, CA 92705-6500 

Insertion 

tool: 

  ITT 

part # 274-7006-000 (Desc. CIET-20HD) 

Regular duty Crimp tool: 

ITT part #995-0001-585 (Desc. M22520/1-01)  

Regular duty Locator tool: 

ITT part #995-0001-244 (Desc. TH25) 

Heavy duty Crimp tool: 

ITT part #995-0001-584 (Desc. M22520/2-01) 

Heavy duty Locator tool: 

ITT part #995-0001-604 (Desc. M22520/2-08) 

L

ICENSE 

R

EQUIREMENTS

An aircraft radio station license is required for operation of the transmitter once installed in 

the aircraft. An application must be submitted on FCC Form 404, which may be obtained 

from the FCC in Washington, DC, or any of its field offices. Procedures for applications are in 

CFR 47, Part 87, Aviation Services, Subpart B, Applications and Licenses.