Garmin Apollo SL40 Installation Manual - page 15

Installation 

Apollo SL40 Installation Manual 

9

Slit 1/4" (2X)

Clamp Nut

0.375

0.031

- Slide clamp nut over coax.

- Strip coax as illustrated.

- Cut two 1/4" slits in jacket 180

   degrees apart.

Braid Clamp

Cap

Solder Center

Conductor

Step 1.

Step 2.

Step 3.

- Slide braid clamp over end of coax and

   under the braid.

- Insert coax with braid clamp into 

   connector and tighten clamp nut securely.

- Solder the center conductor of the coax

   to the contact as illustrated.

- Attach the cap and secure tightly.

Assembly instructions for right angle connector part #162-1008

0.125

Figure 4  Coax Connector Assembly