Garmin eTrex Touch 25 Owner's Manual - Device Information
2
Select an alarm type.
3
Select
On
.
4
Enter a distance, and select .
Resetting Data
You can reset trip data, delete all waypoints, clear the current
track, or restore default values.
1
Select
Setup
>
Reset
.
2
Select an item to reset.
Restoring Default Values for Specific Settings
1
Select
Setup
.
2
Select an item to reset.
3
Select >
Restore Defaults
.
Restoring Default Values for Specific Page Settings
You can restore the default values for settings for the map,
compass, trip computer, and elevation plot.
1
Open the page for which you will restore the settings.
2
Select >
Restore Defaults
.
Restoring All Default Settings
You can reset all settings back to the factory default settings.
Select
Setup
>
Reset
>
Reset All Settings
>
Yes
.
Device Information
Specifications
Battery type
2 AA batteries, (alkaline, NiMH, lithium, or
precharged NiMH)
Battery life
Up to 16 hr.
Operating temperature
range
From -20°C to 70°C (from -4°F to 158°F)
Radio frequency/protocol
2.4 GHz ANT+ wireless technology
Bluetooth Smart device
Water rating
IEC 60529 IPX7*
Compass-safe distance
30 cm (11.8 in.)
*The device withstands incidental exposure to water of up to 1 m
for up to 30 min. For more information, go to
.
Support and Updates
Garmin Express
™
provides easy access to these services for
Garmin devices.
• Product registration
• Product manuals
• Data uploads to Garmin Connect
Setting Up Garmin Express
1
Connect the device to your computer using a USB cable.
2
Go to
3
Follow the on-screen instructions.
Getting More Information
You can find more information about this product on the Garmin
website.
• Go to
.
• Go to
, or contact your Garmin dealer
for information about optional accessories and replacement
parts.
Registering Your Device
Help us better support you by completing our online registration
today.
• Go to
.
• Keep the original sales receipt, or a photocopy, in a safe
place.
Battery Information
WARNING
The temperature rating for the device may exceed the usable
range of some batteries. Alkaline batteries can rupture at high
temperatures.
Do not use a sharp object to remove batteries.
CAUTION
Contact your local waste disposal department to properly
recycle the batteries.
NOTICE
Alkaline batteries lose a significant amount of their capacity as
the temperature decreases. Use lithium batteries when
operating the device in below freezing conditions.
Maximizing the Battery Life
You can do several things to extend the life of the batteries.
• Reduce the backlight brightness (
).
• Reduce the backlight timeout (
).
• Use battery save mode (
).
• Decrease the map drawing speed (
).
Turning On Battery Save Mode
You can use battery save mode to prolong the battery life.
Select
Setup
>
Display
>
Battery Save
>
On
.
In battery save mode, the screen shuts off when the backlight
times out. You can select to turn on the screen, and you can
double tap to view the status page.
Long-Term Storage
When you do not plan to use the device for several months,
remove the batteries. Stored data is not lost when batteries are
removed.
Device Care
NOTICE
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Secure the weather cap tightly to prevent damage to the USB
port.
Cleaning the Device
NOTICE
Even small amounts of sweat or moisture can cause corrosion
of the electrical contacts when connected to a charger.
Corrosion can prevent charging and data transfer.
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
After cleaning, allow the device to dry completely.
Device Information
11