Garmin Fishfinder 80 Installation Instructions - page 2
Installing/Removing the Unit
1. Connect the wiring harness to the unit, making sure the locking ring is
fully tightened. (Figure 4)
2. Slide the Fishfinder into the pocket. When the Fishfinder is fully inserted,
it will click into place at the lock tabs (Figure 5). It may be necessary to
apply some pressure when inserting the assembly into the pocket to
compress the foam rubber pads.
3. To remove the unit from the pocket, press the lock tabs toward the unit
while sliding the unit out of the pocket. (Figure 6)
© 2003 Garmin Ltd. or its subsidiaries
Garmin International, Inc.
1200 East 151
st
Street, Olathe, Kansas 66062, U.S.A
Garmin (Europe) Ltd.
Unit 5, The Quadrangle, Abbey Park In dus tri al Estate, Romsey, SO51 9DL, U.K.
Garmin Corporation
No. 68, Jangshu 2
nd
Road, Shijr, Taipei County, Taiwan
www.garmin.com
Part Number 190-00311-00 Rev. A
Figure 5
Figure 6
Figure 4
Lock Tabs