Garmin G300 for Cessna SkyCatcher Pilot's Manual

Other manuals for G300 for Cessna SkyCatcher: User Manual, Pilot's Manual, Pilot's Manual, Installation Manual
Manual is about: G300 Pilot's Guide

Summary of G300 for Cessna SkyCatcher

  • Page 1

    Mode a/c transponder pilot’s guide gtx ™ 327.

  • Page 2

    © copyright 1999 - 2008 garmin ltd. Or its subsidiaries all rights reserved except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of garmi...

  • Page 3

    Limited warranty this garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, garmin will at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no c...

  • Page 4

    Mode selection keys off  powers off the gtx 327. Pressing stby, on, or alt key powers on the transponder displaying the last active identification code. Stby  selects the standby mode. When in standby mode, the transponder will not reply to any interrogations. On  selects mode a. In this mode, th...

  • Page 5

    Keys for other gtx 327 functions ident pressing the ident key activates the special position identification (spi) pulse for 18 seconds, identifying your transponder return from others on the air traffic controller’s screen. The word ident will appear in the upper left corner of the display during t...

  • Page 6

    Note: transponder options are normally set at time of installation. For changes to the gtx 327 parameters, contact your garmin authorized service center. Pressure alt: displays the altitude data supplied to the gtx 327 in feet, hundreds of feet (i.E., flight level), or meters, dependent upon install...

  • Page 7

    Timer operation to operate the flight timer: 1. Press the func key until flight time is displayed. 2. If the gtx 327 flight timer is configured as accumulate or clear, the timer will begin automatically when the unit senses that the aircraft has become airborne. The timer may be reset to zero at eve...

  • Page 8

    © 1999 - 2008 garmin ltd. Or its subsidiaries garmin international, inc. 1200 east 151 st street, olathe, kansas 66062, u.S.A. Garmin (europe) ltd. Liberty house, bulls copse road, hounsdown business park, southampton, so40 9rb, u.K. Garmin corporation no. 68, jangshu 2 nd road, shijr, taipei county...