Garmin GTN 625 Installation Manual - page 118
GTN 625/635/650 TSO Installation Manual
190-01004-02
Page 6-8
Rev. F
GTX Mode C #2
N/A
Select this format for the GTX 32 transponder #2. Provides
status data, altitude data, and flight ID. Choosing this input
setting will automatically configure the corresponding
channel output to the same setting.
GTX Mode S #1
N/A
Select this format for the GTX 33/33ES transponder #1.
Provides status data, ICAO address, and Flight ID.
Choosing this input setting will automatically configure the
corresponding channel output to the same setting.
GTX Mode S+ #1
N/A
Select this format for the GTX 33ES/330ES transponder #1
with GTX software version 7.00 or later for AC 20-165
compliance. Provides status data, ICAO address, and Flight
ID. Choosing this input setting will automatically configure
the corresponding channel output to the same setting.
GTX Mode S #2
N/A
Select this format for the GTX 33/33ES transponder #2.
Provides status data, ICAO address, and Flight ID.
Choosing this input setting will automatically configure the
corresponding channel output to the same setting.
GTX Mode S+ #2
N/A
Select this format for the GTX 33ES/330ES transponder #2
with GTX software version 7.00 or later for AC 20-165
compliance. Choosing this input setting will automatically
configure the corresponding channel output to the same
setting.
GTX w/TIS #1
N/A
Select this format for the GTX 33/33ES transponder #1.
Provides status data, TIS data, ICAO address, and Flight
ID. Choosing this input setting will automatically configure
the corresponding channel output to the same setting.
GTX w/TIS+ #1
N/A
Select this format for the GTX 33ES/330ES transponder #1
with GTX software version 7.00 or later for AC 20-165
compliance. Provides status data, TIS data, ICAO address,
and Flight ID. Choosing this input setting will automatically
configure the corresponding channel output to the same
setting.
GTX w/TIS #2
N/A
Select this format for the GTX 33/33ES transponder #2.
Provides status data, TIS data, ICAO address, and Flight
ID. Choosing this input setting will automatically configure
the corresponding channel output to the same setting.
GTX w/TIS+ #2
N/A
Select this format for the GTX 33ES/330ES transponder #2
with GTX software version 7.00 or later for AC 20-165
compliance. Provides status data, TIS data, ICAO address,
and Flight ID. Choosing this input setting will automatically
configure the corresponding channel output to the same
setting.
Lightning Detector 1
WX-500
Lightning strike information from an L3 Communications
WX-500 Stormscope.
GTN Selection
GNS Equivalent
Description