Garmin GTN 625 Installation Manual - page 76
of
254
GTN 625/635/650 TSO Installation Manual
190-01004-02
Page 4-10
Rev. F
Table 4-5. Socket Contact Part Numbers
[1] Recommended crimp tools are listed in Table 4-5.
[2] For configuration module pins, ensure that the crimp tool is set to crimp 28 AWG wire (indenter
setting of ‘4’).
[3] Non-Garmin part numbers shown are not maintained by Garmin and are subject to change
without notice.
Wire Gauge
P1001-P1004
(including P1001 configuration
module) [2]
22-28 AWG [2]
Garmin P/N
336-00021-00
Military P/N
M39029/58-360 [3]
AMP
204370-2 [3]
Positronic
MC8522D [3]
ITT Cannon
030-2042-000 [3]