Garmin Nuvi 710 Quick Start Manual

Other manuals for Nuvi 710: Owner's Manual
Manual is about: nüvi 700 Series Personal Travel Assistant

Summary of Nuvi 710

  • Page 1

    Quick start manual © 2007 garmin ltd. Or its subsidiaries august 2007 190-00859-01 rev. C printed in taiwan nüvi ® 700 series personal travel assistant.

  • Page 2: What’S In The Box?

    What’s in the box? Nüvi gps device and vehicle suction cup mount. Vehicle power cable to provide external power, or an fm tmc traffic receiver to provide external power and traffic information. Usb cable to connect the nüvi to your computer. Your nüvi connects to your computer as a mass storage devi...

  • Page 3: Step 1: Mount The Nüvi

    Step 1: mount the nüvi 1. Plug the vehicle power cable into the power connector on the right side of the cradle. 2. Snap the cradle onto the suction cup arm. 3. Clean and dry your windshield and the suction cup with a lint-free cloth. Remove the clear plastic from the suction cup. Place the suction ...

  • Page 4: Step 2: Configure The Nüvi

    Step 2: configure the nüvi to turn on your nüvi, slide the power key to the left. Follow the on-screen instructions. Step 3: acquire satellites go outdoors to an open area, out of garages, and away from tall buildings. Stop your vehicle, and turn on the nüvi. Acquiring satellite signals may take a f...

  • Page 5: Viewing The Main Pages

    Viewing the main pages touch view map to open the map page. The vehicle icon shows your current location. Touch the map and drag to view different parts of the map. Touch anywhere on the map; an arrow appears pointing at the object. After you touch go, the map page opens. Your route is marked with a...

  • Page 6: Adding A Via Point

    Adding a via point 1. With a route active, touch menu on the map, and touch where to . 2. Search for the via point (extra stop). 3. Touch go . 4. Touch add as via point to add this stop before your destination. Tip: to add more than one stop, edit the current route. Touch where to > routes . Using f...

  • Page 7: Pairing Your Phone

    Pairing your phone 1. Confirm that your phone is supported by the nüvi. (see www.Garmin.Com/bluetooth .) 2. From the menu page, touch tools > settings > bluetooth . 3. Touch the add button. 4. Enable your phone’s bluetooth component and enable find me/discoverable/visible mode. These settings might ...

  • Page 8: Loading Files On Your Nüvi

    Loading files on your nüvi connect the usb cable to the mini-usb connector on the nüvi and to an available usb port on your computer. Your nüvi’s internal memory and sd card appear as removable drives in my computer on windows ® computers, and as mounted volumes on mac ® computers. Copy and paste fi...