Garmin VARIA UT800 Owner's Manual - page 9
3
On the Varia remote, hold two keys simultaneously until the
status LED starts alternating green and red, and release the
keys.
The remote searches for your Varia device. After the remote
pairs successfully, the status LED flashes green 12 times.
After the remote is paired, it connects to your device whenever
the device is in range and turned on in smart mode. You may
need to wake the remote by selecting any key.
Updating the Software Using Your Computer
Before you can update your device software using your
computer, you must have a USB ANT Stick
™
and a Garmin
Connect
™
account, and you must download the Garmin Express
application.
1
Plug the USB ANT Stick into a computer USB port.
2
Connect the device to your computer using the USB cable.
When new software is available, Garmin Express sends it to
your device.
3
Follow the on-screen instructions.
4
Do not disconnect your device from the computer during the
update process.
Other Compatible Devices
5