Goldmund TELOS 390 User Manual - page 7
3
User manual - GOLDMUND TELOS 390 INTEGRATED AMPLIFIER |
P 6
C O N N E C T I O N S
Connect the powercord to the back of the amplifier and plug it into the nearest wall plug.
For safety reasons, use only a 3 lugs grounded plug.
To get the best sound from the amplifier, avoid any multi-way plugs or extension cords.
Connect the speaker cables to the binding posts on the rear panel.
Connect the interconnects from any analog sources to line inputs 1 to 5.
Connect the interconnects from any digital sources to line inputs 6 to 8.
ATTENTION
A residual high frequency noise may remain audible in some circumstances if an input is left
open and is selected. This disturbance has no effect on the Amplifier but may be avoided
easily through the application of short-circuit plugs on all unused inputs.