Golf Buddy CT2 User Manual - 2.1 Power On / Off
French Date Format: In time setting mode, press the button once to edit the Format. The default
Date Format is in English; the secondary option is French. When the blinking / icon appears,
navigate with the / buttons to select desired selection. Press the button three times to apply
the changes and return to time mode.
2.1 Power ON / OFF
Press and hold the button for 3 seconds to power the CT2 ON/OFF
2.2 Charging
To charge the device, attach the USB clip as
depicted in the images to the left. Align the charger
guide posts with the
guide holes on the back
side of the CT2 unit to
clip in place. The battery
indicator will display while
charging as shown in the
image to the right. When
fully charged the battery
indicator will display as
a full battery. To disconnect the CT2, pinch
the charging clip and pull away from the unit.
2.3 Time Setting
The time will set automatically once the CT2 successfully connects to Satellite’s via GPS (please
note: you must be outdoors to connect to satellites); however, time zones and daylight savings will
need to be set accordingly. To set the clock manually (from the Time/Date screen), press and hold
the button to bring up the time setting mode. Press the or buttons to change the hour, then
press the button 4 times to apply the changes.
*Note: The minutes are set automatically upon successful satellite connection and cannot
be manually adjusted.
2. GETTING STARTED
4