8x8 3g/hd/sd-sdi matrix user manual rev: 160801 made in taiwan m m a a - - 3 3 1 1 8 8 8 8.
Safety and notice the ma-3188 8x8 3g/hd/sd-sdi matrix has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the ma-3188 should be used with care. Please read and follow the safety instructions to...
Introduction the ma-3188 8x8 3g/hd/sd-sdi matrix provides the most flexible and cost effective solution in the market to route 3gbps high definition video sources from any of the eight sdi sources to the any eight sdi receivers at the same time. This solution is well suited for use in home theater, ...
Specifications model name ma-3188 technical role of usage true 8x8 matrix video bandwidth 2.97 & 2.97/1.001gbps video support [3g] 1080p@50/59.94/60 (4:2:2) [hd] 720p50/59.94/60, 1080p24/30, 1035i50/59.94/60, 1080i50/59.94/60 [sd] ntsc@59.94hz, pal@50hz audio support yes cable equalization [3g] up t...
Panel descriptions front panel 1. Power switch: power on/off switch 2. Ir sensor: ir sensor for receiving the ir commands from ir remote 3. Output push button & 7-segment led: front panel push buttons used to select the number of display channels & led display for output ports 4. Input push button &...
Connection diagram hardware installation ma-3188 1. Connect all sources to sdi inputs on the 8x8 sdi matrix 2. Connect all outputs to sdi receiver 3. Connect the ac power supply to the 8x8 sdi matrix 4. Power on the 8x8 sdi matrix ma-3188 4.
Operation approach method a: push-in button in/out map 1) use the “+”or “-“ output push button to select the number of display 2) use the “+”or “-“ input push button to select the number of input source “+”: change selected input/output port in ascending order “-” : change selected input/output port...
Method c: software control through rs-232 port system requirements and precautions 1. Whenever power off ma-3188, please stay unpowered at least 5 to 10 seconds to allow power capacitors to discharge. 2. The ma-3188 provides software control program under microsoft windows xp, 7, 8 through the inter...
3. Connection status show the connect status (connected or disconnected). 4. In/out switch panel for each output, you can assign arbitrary video source or mute output video here. 5. Firmware update the “firmware update” window shows up as below. Before firmware update process, please ensure your rs-...
7. Default reset to do factory default reset. This default reset process will take about 10 seconds. Method d: terminal control: baud rate: 115200 data length: 8bit parity check: no stop bit: 1 command action st + 0x0d show all mapping pon + 0x0d power on the device poff + 0x0d power off the device ...
Limited warranty the seller warrants the ma-3188 8x8 3g/hd/sd-sdi matrix to be free from defects in the material and workmanship for 1 year from the date of purchase from the seller or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, the selle...
