GoMax Electronics MA-3188 User Manual - page 9
3. Connection Status
Show the connect status (Connected or Disconnected).
4. In/Out switch panel
For each output, you can assign arbitrary video source or mute output video here.
5. Firmware Update
The “Firmware update” window shows up as below. Before firmware update process, please ensure
your RS-232 cable is connecting and the status is “CONNECTED”.
Click
button to select the firmware file which you want to update.
Click
button.
Recycle power.
Click
button and the firmware will start to update.
Front Panel firmware update
Click
button to select the firmware file which you want to update.
Click
button.
Click
button.
Recycle power and the front panel firmware will start to update.
Press the lower left button of front panel until the firmware update process is finished.
6. Mapping
Save/Recall the Mapping Configuration. In this part, you can rename the mapping, save the current
mapping or recall previous saved mapping.
7