1x4 dvi splitter over single cat.X with hdcp support user manual rev: 111209 made in taiwan s s p p - - 1 1 0 0 1 1 4 4.
The sp-1014 1x4 dvi splitter over single cat.X with hdcp support has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the sp-1014 should be used with care. Please read and follow the safety inst...
1 introduction the sp-1014 1x4 dvi splitter over single cat.X with hdcp support provides the most flexible solution by which the high definition video and high quality audio can be transmitted to different locations over a long distance. The devices are cascadable, allowing you to extend dvi complia...
2 specifications model name sp-1014 technical sp-1014[tx] cv-17[rx] cv-117[rx] role of usage 1x4 distribution amplifier transmitter [tx] receiver [long range rx] receiver [short range rx] dvi compliance dvi 1.1 hdcp compliance no yes yes video bandwidth single-link 165mhz [4.95gbps] video support up...
3 panel descriptions front panel 1. Power indicator led rear panel 2. Dip switch: see more detail in the next page 3. Dvi-d input: connect to one dvi source here 4. Dvi-d signal output 1~4: link to each dvi display via a cat-5/5e/6 cable with a dvi over cat.X receiver cv-711 or cv-711s. 5. Usb: for ...
4 hardware installation broadcasts dvi signals to 4 remote displays from one video source 1. Switch off all devices, including displays. 2. Connect the dvi source to the dvi-d input port. 3. Connect the receivers (cv-711 or cv-711s) via solid cat-5/5e/6 cables to each dvi-d signal output port. 4. Pl...
5 dip switch dip switch position edid mode description pin#1 pin#2 off [ ] off [ ] up to 1920x1080 default mode 1 1 – edid preferred timing is 1920x1080 off [ ] on [ ] up to 1024x768 default safe mode 1 – edid preferred timing is 1024x768 on [ ] off [ ] up to 1680x1050 default mode 1 2 – edid ...
6 pin definition dvi a female dvi-i socket from the front pin 1 tmds data 2- pin 10 tmds data 1+ pin 18 tmds data 0+ pin 2 tmds data 2+ pin 11 tmds data 1/3 shield pin 19 tmds data 0/5 shield pin 3 tmds data 2/4 shield pin 12 tmds data 3- pin 20 tmds data 5- pin 4 tmds data 4- pin 13 tmds data 3+ pi...
7 notice 1. If the dvi device requires the edid information, please use edid reader/writer to retrieve and provide dvi display edid information. 2. All dvi over cat.X transmission distances are measured using belden 1583a cat5e 125mhz utp cable and astrodesign video signal generator vg-859c. 3. The ...
8 warranty the seller warrants the sp-1014 1x4 dvi splitter over single cat.X with hdcp support free from defects in the material and workmanship for 1 year from the date of purchase from the seller or an authorized dealer. Should this product fail to be in good working order within 1 year warranty ...
