GoMax Electronics SP-1014 User Manual - Hardware Installation
Manual is about: 1x4 DVI Splitter over Single Cat.X with HDCP Support
of
10
4
HARDWARE INSTALLATION
Broadcasts DVI signals to 4 remote displays from one video source
1. Switch off all devices, including displays.
2. Connect the DVI source to the DVI-D INPUT port.
3. Connect the receivers (CV-711 or CV-711S) via solid Cat-5/5e/6 cables to each DVI-D Signal
OUTPUT port.
4. Plug in the 5V 4A DC interlocking power supply unit.
5. Power on the DVI displays.
6. Power on the DVI source.