GoMax Electronics SP-9018 User Manual

Manual is about: 1x8 VGA over CAT5 Transmitter

Summary of SP-9018

  • Page 1

    Sp-9018 1x8 vga over cat5 transmitter user manual.

  • Page 2: Safety And Notice

    1 safety and notice the sp‐9018 1x8 vga over cat5 transmitter has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the sp‐9018 should be used with care. Please read and follow the safety instruc...

  • Page 3: Features

    2 the sp‐9018 1x8 vga over cat5 transmitter provides the most flexible solution by which the high resolution pc video and high quality stereo audio can be transmitted to different locations over super long distances. Built with 2 vga and digital/analog audio loop outs, local a/v receivers can provid...

  • Page 4

    3 cat5 cable cat5 cable up to 330m (1000ft) vga cable sp-9018 vga source lcd #1 cv-917d lcd #2 cat5 cable lcd #3 vga cable cat5 cable lcd #4 vga cable cat5 cable lcd#8 lcd #7 lcd #5 vga cable lcd #6 vga cable cv-917d cv-917d vga cable cv-917d cv-917d cv-917d cv-917d cv-917d.

  • Page 5: Package Content

    4 package content z 1x sp‐9018 unit z 1x 5v 4a power adapter z 1x user manual technical specifications z input video signal: 1.2 volts p‐p z video input bandwidth: 350mhz z vga connector: d‐sub 15 pin z s/pdif: rca z analog stereo connector: 3.5 mm phone jack z power supply: 5v 4a z power consumptio...

  • Page 6: Sp‐9018

    5 sp‐9018 1. Power jack 5v dc 2. Vga input: connect a vga source here 3. Stereo audio input: connect a audio source here 4. Spdif audio input 5. Local video and audio loop out 6. Local video and audio loop out 7. Rj45 outputs: link to the cv‐97 series receiver panel descriptions remote control 1 2 5...

  • Page 7: Hardware Installation

    6 broadcasts pc a/v signals to 8 remote displays and two local receivers 1. Switch off all devices, including monitors. 2. Connect a vga and audio source (such as a pc) to the vga and audio in. 3. Connect to the receivers (such as cv‐917‐rx or cv‐917d‐rx) via rj45 connectors by a cat5e cable. 4. Plu...

  • Page 8: Notice

    7 1. All the transmission distances are measured using belden cat‐5e 125mhz solid cable and astrodesign video signal generator vg‐859c. The transmission distance is defined as the distance between the sp‐9018 and the remote vga display. 2. The transmission length is largely affected by the type of l...

  • Page 9: Limited Warranty

    8 the seller warrants the sp‐9018 1x8 vga over cat5 transmitter to be free from defects in the material and workmanship for 1 year from the date of purchase from the seller or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, the seller, at its...