GoMax Electronics SP-9018 User Manual - Hardware Installation
Manual is about: 1x8 VGA over CAT5 Transmitter
of
9
6
Broadcasts PC A/V signals to 8 remote displays and two local receivers
1. Switch off all devices, including monitors.
2. Connect a VGA and audio source (such as a PC) to the VGA and audio In.
3. Connect to the receivers (such as CV‐917‐RX or CV‐917D‐RX) via RJ45 connectors by a CAT5e cable.
4. Plug in 5V 4A DC power supply.
5. Power on the receiver’s monitors and speakers.
6. Power on the PC source.