Clb 200 wb clr 200 wb clr 200 dual radio reporter base station. Incl. Hidyn.
This is a product description for vhf diversity receiver with build in uhf return transmitter type clb 200 (clr 200 is equal to clb200 but without build in return transmitter) clb 200 is a complete radio broadcast station. With a clb 200 you can receive a portable transmitter on vhf, but also transm...
Operation: receiver: left channel switch controls the receiver frequency. Frequency can be read on the top line of the display. With an optional adjustable mute, mute level can be controlled. If a remote control is used, mute can be controlled by the remote. In remote control mode, left channel swit...
Power of the clb 200 wb: the clb has a standard 230v power supply. For use in cars, planes etc. Where no 230v is present clb 200 can be provided with a 12v connector. This is a 4-pin xlr connector. 12v input and 230v secondary output are not parallel, you can not recharge a battery this way. Cooling...
Specifications clb 200 wb reporter base station general: power supply 230v 40va 12 - 15v 2.5a antenna connectors n optional bnc - tnc audio connector (s) xlr 3 male / female dimensions 1u 19 "depth 280mm transmitter number of channels: 16 adjustable at front frequency range standard (narrowband) 410...
Programming the entire unit: connect a laptop with rs232 adapter cable to connect the program to the interface board. (interface print the front print, connection behind the unit (next antenna connector) via a 3.5mm jack) open the hyperterminal program. (desk accessories), or use eq. Program. Settin...
Remote pin configuration of the clb 200 w. (french version) standard description i / o remarks pin number 1 ground o 2 +5v o 3 reporter talkback select out o for france only 4** tx signalizing o +5v = tx on 5** nc 6** tx contact (ptt) i gnd is tx on open is front control 7** rf output level (tx) o 0...
Remote pin configuration of the clr 200-w dual receiver . Standard description i / o remarks pin number 1 ground o 2 +5v o 3 reporter talkback select out o for france only 4 rx2 mute / audio led o 0v = mute > 5v = audio 5 rx2 audio level o 0 – 5v load > 1k 6 nc 7 rx2 field strength b o 0 – 5v load >...
