H & F Technologies AWP6042 Owner's Manual - page 6
4
Descriptions and Functions
MIC LEVEL
MIN
MAX
MIN
MAX
TONE
VOLUME
POWER INPUT
POWER
ON
OFF
BATTERY LEVEL
CHARGING
BATTERY: 12V 4.0AH
CAUTION
:
1 Do not expose the battery to high temperature
.
.
2 Keep the battery away from heat source or fire
.
.
Strike the battery with any object
.
3 Do not strike the battery against any object or
3 Do not strike the battery against any object or
..
.
4 Do not open the battery case
.
.
BATTERY 1X4AH 12V LITHIUM ION
:
(
-
)
SERIAL NO.:
3
2
1
4
5
6
7
8
9
10
13
14
15
16
17
21
18
19
20
11
12
1. Battery - 12V/4AH lithium-ion rechargeable battery
2. Battery Level Indicator
3. Charging - The Charging LED Light will be on when
the unit is being charged.
4. DC 12-16V/4A Input Jack
5. Power ON/OFF Switch
6. Music Volume Control - Turn this music volume
control knob clockwise to raise the music
volume and counter-clockwise to lower the music
volume.
7. Music Tone Control - Turn this music tone control
knob clockwise to raise the treble volume and
counter-clockwise to raise the bass volume.
8. REPEAT - Press the REPEAT button once
(showing ONE on the LED display) to repeat the
same music piece. Press the Repeat again
(showing ALL on the LED display) to repeat all
the content in the USB device or the SD card.
Press again to go back to repeat the
same music piece.
9. INPUT - Press this INPUT button to toggle
through all the available input channels
(LINE IN / USB /SD Card). If the USB input and
the SD card are not available, the input selection
will stay at the LINE IN channel.
10. LED Display
11. SD Card Input
12. USB Device Input
13. Next - When the USB or SD card is in use and the
REPEAT function was set to ALL, press this
button to skip the current track and jump to the
next track. If the REPEAT function was set to ONE,
press this button to jump to the starting point of the
current track.
14. Prev - When the USB or SD card is in use and the REPEAT function was set to ALL, press this button to
skip the current track and jump to the previous track. If the REPEAT function was set to ONE, press this
button to jump to the starting point of the current track.
15. Play/Pause - When the USB or SD card is in use, press this button to pause. Press this button again
to replay from the paused point on. If the Stop button (as shown in numeral 16) is pressed when the USB
or SD card is in use, pressing this Play/Pause button will have the replay started from the first track.
16. Stop - Press this button to stop replaying the USB or SD card. The LED display will stop at the last track
of the device being replayed.
17. WIRELESS LEVEL - This is the wireless microphone volume control knob. Turn this WIRELESS LEVEL
control knob clockwise to increase the wireless microphone volume and counter-clockwise to lower
the wireless microphone volume.
18. MIC LEVEL - This is the wired microphone volume control knob. Turn this MIC LEVEL control knob
clockwise to increase the wired microphone volume and counter-clockwise to lower the wired
microphone volume.
19. PRE OUT - This is a 3.5mm stereo audio output jack.
20. MIC INPUT - This is a 1/4" unbalanced microphone input jack.
21. LINE IN - This is a 3.5mm stereo audio input jack.
USB
SD MMC CARD
/