H3C H3C S5600 Series Operation Manual - page 10
Operation Manual – IRF Fabric
H3C S5600 Series Ethernet Switches-Release 1510
Chapter 1 IRF Fabric Configuration
1-9
Table 1-9 Display and debug FTM
Operation
Command
Description
Display the information
about an IRF fabric
display irf-fabric [ status ]
Display the topology
information of an IRF
fabric
display ftm { information |
topology-database }
Display RMON statistics
of a specified unit in an
IRF fabric
display rmon statistics
unit unit-id
Display RMON history
data of a specified unit in
an IRF fabric
display rmon history unit
unit-id
Thesecommands can be
executed in any view.
Clear the FTM statistics
reset ftm statistics
Execute this command in
user view
1.5 IRF Fabric Configuration Example
1.5.1 Network Requirements
Configure unit ID, unit name, IRF fabric name for four switches to enable them to form
an IRF fabric.
The configuration details are as follows:
z
Unit IDs: 1, 2, 3, 4
z
Unit names: unit 1, unit 2, unit 3, unit 4
z
Fabric name: hello
1.5.2 Network Diagram
Fabric
Fabric port
user port
Fabric
Fabric port
user port
h B
D
Switch A
Switc
Switch C
Switch
Fabric
Fabric port
user port
Fabric
Fabric port
user port
h B
D
Switch A
Switc
Switch C
Switch
Figure 1-2 Network diagram for forming an IRF fabric