H3C S1016 User Manual - 2.1.1 Security Tips
User Manual
H3C S1016/1024 Ethernet Switch
Chapter 2 Switch Installation
2-1
Chapter 2 Switch Installation
2.1 Installation Preparations
2.1.1 Security Tips
To avoid any device impairment or bodily injury caused by
improper use, take the precautions listed below:
z
Before cleaning the switch, please unplug the switch
connector first. Do not clean the switch with wet cloth or
liquid.
z
Do not place the switch near water or in any damp area.
Prevent water or moisture from entering the switch chassis.
z
Keep the switch to operate in clean environment. Dust
buildup on the chassis may result in static absorption,
shortening the life span of the switch and causing
communication failure.
z
S1016/1024 use air cooling approach for they just generate
a small amount of heat. Keep the switch in good ventilation
condition. Do not place one switch on another.
z
The switch can operate normally under proper voltage input.
Make sure that the operating voltage is consistent with that
labeled on the switch.
z
Do not open the chassis while the switch is in operation. Do
not open the chassis if not necessary, even when the switch
is not powered on.