Haan SELECT SI-60 Instruction Manual - page 8
6
11
Handle Assembly:
Line up groove &
insert into unit.
Floor Setting Indicator Light:
ideal for ceramic, stone, tile and
other durable floors.
Perfect for sealed hardwood,
laminate, bamboo and other
delicate floors.
Product Assembly & Parts
1
5
6
7
8
9
10
11
12
14
15
13
16
17
2
3
4
A
B
Troubleshooting
Base Assembly:
insert screw as shown. Tighten using
a flat-head screwdriver. if screw
turns freely without “gripping” the
insert threads, apply additional pres-
sure when turning.
White spot left on floor.
Unit does not emit steam.
Water left on floor.
Unit not operating.
• When cleaning do not leave unit in one spot for too long.
• Use protector pad / floor mat when unit is ON and stationary.
• Use distilled water instead of hard tap water.
NOTE: To remove spot, use a damp cloth with a few drops of white vinegar
to rub and remove stain.
• Ensure water tank is filled with water.
• Change the Ultra-microfiber pad.
• Ensure unit is always level and parallel to the floor.
• Ensure plug is set firmly in outlet.
• Replace fuse or reset breaker.
Problem
Solution