Habasit ag postfach, ch-4153 reinach-basel phone ++41 61 715 15 15 fax ++41 61 715 15 55 operating instructions 36009 author: nyk/ni/aa page 1 of14 edition: 03/0404 subject to alterations replaces: edition 02/9912 welding device pq-18 the pq-18 is a simple and cost effective tool for welding of poly...
Operating instructions 36009 welding device pq-18 page 2 of14 edition: 03/0404 subject to alterations table of contents 1. General information ............................................................................................................................ 3 1.1 application..................
Operating instructions 36009 welding device pq-18 page 3 of14 edition: 03/0404 subject to alterations 1. General information 1.1 application the welding device pq-18 has been specifically designed for rapid and safe welding of polycord round belts up to a diameter of 15 mm / 0.6 in. The pq-18 weldin...
Operating instructions 36009 welding device pq-18 page 4 of14 edition: 03/0404 subject to alterations 1.3 scope of supply qty. Item order no. 1 welding tool 230v~, euro 709 008 or 1 welding tool 120v~, usa 709 006 1 guiding tongs with holding device 690 240 1 operating instruction 1.3.1 available ac...
Operating instructions 36009 welding device pq-18 page 5 of14 edition: 03/0404 subject to alterations 1.4 ordering of accessories/spare parts spare parts and accessories can be ordered directly from the manufacturer. Address: habasit italiana s.P.A. Via a. Meucci 8, zona industriale i-31029 vittorio...
Operating instructions 36009 welding device pq-18 page 6 of14 edition: 03/0404 subject to alterations 2. Mode of operation the heating power and the output control of the welding tool (2) in combination with the welding plate (1) are optimally adapted to the energy requirement for butt-end welding o...
Operating instructions 36009 welding device pq-18 page 7 of14 edition: 03/0404 subject to alterations 4. Welding of polycord round belts process: engineering manual 1260 cut polycord round belt to length at right angles with cutting device s-16 (-> available accessories). For determination of belt l...
Operating instructions 36009 welding device pq-18 page 8 of14 edition: 03/0404 subject to alterations 5. Service 5.1 maintenance keep the welding device clean at all times. Clean the welding plate (1) regularly and remove all material residues. Clean the welding plate (1) while heated with a cotton ...
Operating instructions 36009 welding device pq-18 page 9 of14 edition: 03/0404 subject to alterations 5.3 adjusting of the thermostat the maximum plate temperature of 270 °c / 520 °f, preset at the factory, must not be exceeded by more than ± 10 °c / ± 18 °f from 270 °c / 520 °f. It can therefore on...
Operating instructions 36009 welding device pq-18 page 10 of14 edition: 03/0404 subject to alterations 6. Illustrations 1 2 5 4 11 8 10 6 7 9 12 3 illustration 1: overall view of pq-18 1 2 3 4 5 6 welding plate welding tool locking spring securing bracket guiding tongs holding device 7 8 9 10 11 12 ...
Operating instructions 36009 welding device pq-18 page 11 of14 edition: 03/0404 subject to alterations 7. Technical data belt diameter [mm] [in.] 2 ... 15 0.08 ... 0.6 temperature (unsolicited) [°c] [°f] 270 520 max. Deviation of plate temperature [°c] [°f] ± 10 ± 18 heating up time to 270 °c / 520 ...
Operating instructions 36009 welding device pq-18 page 12 of14 edition: 03/0404 subject to alterations 8. Drawing and spare part numbers 700024 702024 709006 120vac usa plug 709008 230vac euro plug 701015 700534 700025 702021 701022 701020 701017 700029 700027 702020 702516 708035 702019 701021 7010...
Operating instructions 36009 welding device pq-18 page 13 of14 edition: 03/0404 subject to alterations 9. Required accessories 9.1 cutting device s-16 the cutting device s-16 (operating instruction 3890) is a manual cutting tool to cut polycord round belts to the required length before the quickmelt...
Operating instructions 36009 appendix welding device pq-18 page 14 of14 edition: 03/0404 subject to alterations product liability, application considerations if the proper selection and application of habasit products are not recommended by an authorized habasit sales specialist, the selection and a...
