Habasit PQ-18 Operating Instructions Manual - Pq-18
Operating instructions 36009
Welding device
PQ-18
Page 5 of14
Edition: 03/0404
Subject to alterations
1.4
Ordering of accessories/spare parts
Spare parts and accessories can be ordered directly from the manufacturer.
Address:
Habasit Italiana S.p.A.
Via A. Meucci 8, Zona Industriale
I-31029 Vittorio Veneto/TV
Tel. ++39 438 91 13
Fax ++39 438 91 2374
Please accurately describe the parts required.
State the numbers according to Section 8. Drawing and spare part numbers and, if applicable, the required
electric voltage for connection to the mains.
WARNING
The use of parts by other manufacturers not meeting Habasit specifications is not
admissible.
Habasit declines all responsibility for the consequences if non-Habasit parts are
used.
1.5 Warranty
All tools undergo a strict final inspection. On the assumption of correct handling, they are warranted against
material and manufacturing defects for 1 year.
1.6 Technical
advice
Our specialists will be pleased to advise you. For technical questions concerning function and condition of
the welding device, please contact the manufacturer (see Chapter 1.4 for the address).