1. DL manuals
  2. Hafele
  3. Radio
  4. RDS B-in-Radio 12V
  5. Manual

Hafele RDS B-in-Radio 12V Manual

Summary of RDS B-in-Radio 12V

  • Page 1

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 1 von 15 1. Welcome thank you for buying this quality product. Please read this manual carefully, especially the safety and security information. Please check that you have the correct manual for your p...

  • Page 2

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 2 von 15 3.3. Signal words and their meaning danger: potential severe physical damage and acute danger. Warning: potential electrical shock physical damage and severe property damage. Caution: potential...

  • Page 3

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 3 von 15 8. Preparatory work before installation install the power cable for 12 vac and the rca cable (for the music center aux) in accordance with installation guidelines, and your desired port scenari...

  • Page 4

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 4 von 15 9.2.2. Connecting power supply and speaker / aux (in) or or connect the cables to the appropriate components (power supply / speaker / aux). Note: the power supply is not part of the btr 55. It...

  • Page 5

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 5 von 15 suitable loudspeakers art.Nr.: 833.02.822 loudspeaker 70,5x70,5x38mm fitting for installation in flush-mounting boxes ø 68 mm, b x t x h: 70,5 x 26 x 70,5 mm material: plastic specifications lo...

  • Page 6

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 6 von 15 9.2.3. Connecting antenna connecting antenna cable: connect the outer screen at (-) and the inner conductor at (+) and screw it firmly with the screws on the front. If there is no external ante...

  • Page 7

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 7 von 15 9.2.5. Connecting external tv (aux 1) 9.2.5. Connecting external amplifier (line out) use a screend rca cable. Connect the screen at (-), inner conductor at (+) and screw it firmly with the scr...

  • Page 8

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 8 von 15 10. Operation 10.1. Getting stated when 230v power supply is up, the device is ready for operation. Note: in case of power supply the green led flashes approximately every 5 seconds briefly to ...

  • Page 9

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 9 von 15 11. Configuration 11.1. Configuration menu - basics on/off: pressing the ‘on/off’ button shortly switches on the rds b-in radio pressing the ‘on/off’ button longer than 2 sec. Starts “sleep mod...

  • Page 10

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 10 von 15 if frequency settings are changed select your memory setting key with the „source +/-“ button to save configuration settings. Menu a2 (autoscan) display as shown: line 1: frequency line 2: fre...

  • Page 11

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 11 von 15 menu c2: sleeptime (1 … 99 minutes) display as shown: zeile 1: sleeptime zeile 2: on/off … minutes menu c3: dim display brightness in operation / standby . Standby : 5 steps (off/step1/step2/s...

  • Page 12

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 12 von 15 display line 2 switches to „15“. Confirm your settings by pressing on the ‘m’ button. Now the settings are stored. You’ll get automatically to the next function menu step. If you want to leave...

  • Page 13

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 13 von 15 11.3. Volume display whilst setting pressing the button „volume“ (+ / -) the actual volume is visable by the arrows in the display. Note: the arrows disappear after 5 seconds if no further cha...

  • Page 14

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 14 von 15 12.3. Frequency setting of radio stations radio station frequency settings via tuning (scan) press the button „scan“ the scan begins at 87,5 mhz and stops automatically at the first found acti...

  • Page 15

    Manual rds b-in-radio 12v fitting to 833.02.820 version (modifications reseverd) 17.08.2015 seite 15 von 15 13. Trouble-shooting noise check your installation and cabling carefully on electromagnetically influences (emc installation guidelines!). No radio station receive with the included antenna co...