Hafele RDS B-in-Radio 12V Manual - page 7
Manual RDS B-in-Radio 12V
Fitting to
833.02.820
Version (modifications reseverd)
17.08.2015
Seite 7 von 15
9.2.5. Connecting external TV (AUX 1)
9.2.5. Connecting external amplifier (Line Out)
Use a screend RCA cable. Connect the screen at
(-), inner conductor at (+) and screw it firmly with
the screws on the front.
The AUX Line-Out is in Mono.
9.3. Flush mounting the device
Run the device with the cables connected and the appropriate equipment frame carefully into the flush
mounting box. Make sure that the cables are not kinked or clamped.
Adopt the distance between the mounting plate and the control unit with the designated cardboard
templates. Screw the unit with the screws in the flush-mounting box set.
Replace the cover frame of the installation program and then use the cover on the control and press
firmly.