Summary of 68A01-1
Page 1
3-axis gimbal vari-focal indoor dome camera.
Page 2: Contents
Features 3 dimension 5 base installations 7 8 connection 9 3-axis gimbal adjustments 9 how to open the gimbal cover 10 vari-focal, dc auto iris lens adjustments 11 osd menu instructions 4 specifications part name and descriptions 6 contents 2.
Page 3: Features
3 features 1/3” ccd 550 tv lines 3.8~9.5mm dc auto iris lens 0.1 lux(normal), 0.002 lux(dss on) separate camera control board -osd menu -service monitor output 12vdc/24vac dual voltage 4” polycarbonate bubble 3-axis gimbal flush mount housing w/ surface mount plate in single package aluminum mountin...
Page 4: Specifications
Specifications 4 * must use specified and regulated 12vdc/24vac power supply. * specifications are subject to change without any prior notice. Video formats image sensor sync system scanning system electronic shutter main video output service monitor output horizontal resolution min. Illumination s/...
Page 5: Dimension
Dimension (unit:mm) 5 70 112 145 70 109 46 46 83 109 83 33 20 50 146 103 108 40 18 50 99146.
Page 6: Parts Name and Descriptions
Parts name and descriptions 6 3 4 1 6 8 7 11 2 10 13 5 12 9 1. Lens 2. Power input connector 12vdc/24vac dual voltage 3. Video output connector – bnc 4. Service monitor output connector 5. Camera control board 6. Safety wire 7. Bubble 8. Dome cover ring 9. Flush mount base 10. Surface mount plate 11...
Page 7: Base Installations
Base installations 7 1. Remove dome cover by loosening 3 screws (t orx m4x9) . Use torx wrench provided with the package. 2. Surface mount: using four st4x30 screws, mount surface plate to a sturdy surface. Using four m4x10screws, affix flush mount base to surface plate. (for flush mount application...
Page 8: Connection
8 connection 20cm service monitor output 12vdc/24vac cctv monitor service monitor - power connections: requires 12vdc or 24vac. - this camera is supplied with a second video output on the camera module. Use this feature along with a service monitor. Up down right left.
Page 9: 3-Axis Gimbal Adjustments
9 3-axis gimbal adjustments gimbal cover gimbal base point-a point-b the gimbal mechanism yields maximum rotation and placement as shown below 1. Pan 355 ° 2. Tilt 85 ° 3. Horizontal rotation 355° how to open the gimbal cover this dome camera has a vari-focal lens integrated inside the gimbal. To ma...
Page 10
1. Remove the gimbal cover from the gimbal base. 2. Loosen zoom & focus screws and make necessary adjustments as shown. Field of view: telephone (t) to wode (w) focus: near(n) to infinity(∞) 3. Replace the gimbal cover back to the gimbal base. 10 vari-focal, dc auto iris lens adjustments zoom focus ...
Page 11: Osd Menu Instructions
Dc flk esc manual atw manual awc off low middle high off low middle high off low middle high off auto 11 osd menu instructions lens shutter white balance backlight agc dnr dss main menu brightness 1-70(25) brightness 1-70(25) shutter 1/60-1/120.000 red 0-256(32) blue 1-256(39) brightness 1-70 (25) l...
Page 12: Osd Menu Instructions
Osd menu instructions 12 special camera id color sync motion det privacy mirror sharpness reset return off on color auto bw int off on off on off on on off area sel area1,2,3, or 4 area state on/off top down left right area sel area1,2,3, or 4 area state on/off top down left right level 0-31(8) main...
Page 13: Osd Menu Istructions
13 osd menu istructions c. White balance this function is used to balance the screen color. - atw (auto tracking white balance): select ‘atw’ when using within the color temperature range of 1,800˚k to 10,500˚k (ex. Fluorecent light, outdoor, sodium vapor lamp or inside tunnels) b. Shutter this func...
Page 14: Osd Menu Istructions
14 osd menu istructions.
Page 15: Osd Menu Istructions
15 osd menu istructions.
Page 16: Osd Menu Istructions
16 osd menu istructions i.