HAI 68A01-1 Operating Manual - 3-Axis Gimbal Adjustments
Manual is about: 3-AXIS GIMBAL VARI-FOCAL INDOOR DOME CAMERA
of
16
9
3-Axis Gimbal Adjustments
Gimbal Cover
Gimbal Base
Point-A
Point-B
The Gimbal mechanism yields maximum rotation and placement as shown below
1. Pan 355 °
2. Tilt 85 °
3. Horizontal
Rotation 355°
How to Open the Gimbal Cover
This Dome Camera has a vari-focal lens
integrated inside the Gimbal. To make
focal/focus adjustments, the Gimbal
cover
needs to be temporarily removed . If lens
adjustments are not necessary, skip to Page 10.
Step-1
As shown on the right, hold the Gimbal base
firmly in place with one hand.
Step-2
Gently press Points A & B with other hand and
pull the Gimbal cover off.
Step-3
Make necessary lens adjustments.
Step-4
Replace the Gimbal cover by gently pressing
back onto the Gimbal base.