Haibrain PGSD834 User Manual - 3. Positioning
as well as wireless transmission over distances of up to 30
meters. Range may vary due to battery and temperature
conditions. The PGSD834 smoke detector does not sense gas,
heat or smokeless flames! The equipment may not be modified
under any circumstances.
3. POSITIONING
It is advisable to install several smoke detectors in your home.
At least one smoke detector should be installed on each floor.
This ensures that an effective warning is possible when a fire
starts. One smoke detector must be installed in the area
outside the bedroom which is used as the exit (corridor and/or
staircase). Also ensure that you install the smoke detector at a
location where it can be easily heard, even through the closed
door of the bedroom! (Otherwise you will not wake up during
a fire alarm!). Recommended best and acceptable locations to
mount smoke detectors (figure A):The smoke detector should
be installed on the ceiling in the centre of the room. Smoke
rises and gathers in this area (figure B) and placing the smoke
alarm here guarantees the earliest possible alarm warning. For
sloping roofs, the smoke alarm should be installed about 1
meter from the highest point, as displayed in figure C. Smoke
detectors can be installed in all rooms, but not in the bathroom
or directly above the cooking area in the kitchen. To avoid
false alarms, do not install the PGSD834 smoke detector in your
kitchen, garage, in dusty places, in places with a higher than
average air flow (near ventilation, open windows), near metal
and in places where the temperature is below 5°C or above
37°C. Ensure that the smoke detector is not installed directly on
or near large metal objects as they can affect the radio range.
Before installing the PGSD834 smoke detector on your ceiling
or the wall, ensure that the PGSD834 is within range of your
Haibrain security system. You can test this by pushing the test
PGSD834
5