Haibrain PGSD834 User Manual - 4. Installation

button of the PGSD834. The 

Haibrain security system should 

now be triggered, depending on the settings. In the case of 

range problems, choose a different location for your PGSD834 

smoke detector. Moving the PGSD834 just a few centimetres 

can make a big difference in range.  

4. INSTALLATION

The following procedure explains the installation of the 

PGSD834 wireless smoke detector and its registration to the 

receiver. 

To install smoke detectors: 

1. 

Open the cover.

2. 

Install the batteries into the detector’s batteries

Compartment. See Figure Batteries Compartment

3. 

The PGSD834 enters Test mode.

From the Programming menu, select Devices, Zones [911]. 

Select the zone to which you want to register the transmitter; 

the system initiates Registration mode. When Save? appears 

on the panel’sLCD display, press 9. 

5. MOUNTING

© 

HAIBRAIN

6 

Locking Pin 

• Before permanently 

mounting the unit, test 

the transmitter from 

the exact mounting 

position.

Detector 

Screws 

Bracket 

• Select the installation 

location. 

Battery Compartment 

• Remove locking pin 

securing the mounting 

bracket to the unit (see 

Figure). 

Tamper 

• Remove the mounting 

bracket from the unit 

by rotating it 

counterclockwise.